Product category:
Drives, motors and power transmission, couplings, clutches
News Release from: Harmonic Drive UK | Subject: Precision gears and actuators
Edited by the Manufacturingtalk Editorial
Team on 10 October 2006
Tallest coordinate measuring machine
power
The latest gear technology from Harmonic Drive is helping to power what is believed to be the world's tallest coordinate measuring machine (CMM).
The latest gear technology from Harmonic Drive, Europe's leading manufacturer of precision gears and actuators, is helping to power what is believed to be the world's tallest coordinate measuring machine (CMM) Perhaps most importantly, the Harmonic Drive component sets are helping to improve the accuracy and overall performance of the innovative CMM, which has been bespoke designed and manufactured by the ITP Group for the Beijing Space Authority for the high precision measuring of small commercial satellites
This article was originally published on Manufacturingtalk on 20 Jun 2006 at 8.00am (UK)
Related stories
Gears/actuators Web site is easier to navigate
Leading manufacturer of precision gears and actuators, has launched a new version of its website that is straightforward to navigate and easy to find information required.
Modular harmonic drive gear is precise
Compact, integrated gear and pre-loaded output bearing unit provides higher bearing load capacity, with significantly improved concentricity and run-out tolerances than competing devices.
The Rugby based ITP Group is the leading global designer, developer and manufacturer of high performance coordinate measurement systems for use across a wide range of industries including automotive, aerospace and power generation.
Since the company was established in 1978 it has produced and supplied over 2,000 high performance machines in over 27 countries.
The innovative 7.3m high CMM built for the Beijing Space Authority is being used to measure the external dimensions of the latest generation of compact commercial satellites that typically measure around 6m high by 3m square.
Further reading
Miniature hollow-shaft servo actuators have power
A range of miniature hollow-shaft servo actuators, includes what may be the world's smallest servo actuator, delivering 1.8Nm of torque from an integrated AC motor, gearbox and encoder.
Hollow shaft servo actuators are compact
A range of compact, hollow shaft servo actuators are designed to offer exceptionally high levels of transmission accuracy and acceleration torque.
Hollow shaft gear increases robot payloads
An innovative hollow shaft gear system has helped Reis Robotics to make significant weight reductions to the operating arm of its latest six-axis, CO2 laser robot.
The size and complexity of the application meant that ITP had to alter the fundamental design of its existing machines, replacing the standard horizontal arm structure with an innovative tapered horizontal arm arrangement that extends from a column, which is constructed from a series of interlocking angled plates.
This unique design gives the machine extra rigidity and enables precise tolerances to be achieved even when at full extension.
The vertical and horizontal positioning of the measuring probe are controlled via a high precision Harmonic Drive HFUC gear unit.
This replaced earlier planetary gearboxes and are based on proven Harmonic Drive gear technology, with each set being constructed from interlocking Circular Spline, Flexspline and Wave Generator mechanisms to offer exceptionally high levels of positional accuracy and repeatability.
In addition, the unique construction of each Harmonic Drive gear unit enables the common problems of backlash to be eliminated, while the HFUC units also feature shortened Flexsplines, to reduce the axial length, and high performance IH tooth profiles, which provide significantly increased torque capacity by comparison with gears incorporating traditional involute gear tooth profiles.
For ITP, the Harmonic Drive component sets are a critical part of the new CMM machine, as Managing Director, Dick Turpin explains.
"Although the planetary gearboxes that we used previously were fit for purpose we have found that the switch to Harmonic Drive gear technology has made a considerable difference to the performance, reliability and functionality of our latest machines.
In the unique, large satellite measuring system, for example, the Harmonic Drive component sets are enabling us both to manufacture an extremely accurate machine, typically to within 0.15mmvolumetric, and to ensure that measurements are consistent to within plus or minus 0.6 seconds of arc".
He continues, "Perhaps as importantly, the units are relatively quick and simple to install, with features such as the high radial load capacity of the output bearing allowing us to mount directly to the pinion; similarly, they are compact and lightweight with a hollow central shaft, so we can minimise the overall dimensions of each CMM machine, which makes construction, shipping and set up even simpler".
The success of the first ITP CMM machine for the Beijing Space Authority has subsequently led to further orders from the same company, with interest now growing from a number of other organisations in China.
As Dick Turpin adds, "The key to our success as a UK manufacturer and exporter is our focus on developing highly specialised machines that offer unrivalled levels of precision and performance; to achieve this we depend on our key suppliers, such as Harmonic Drive, who provide us with the leading edge technology we need for long term export growth.".
• Harmonic Drive UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
