Product category:
Monitoring and sensor equipment and systems
News Release from: HBM UK | Subject: Pre-wired strain gauges
Edited by the Manufacturingtalk Editorial
Team on 31 March 2003
Pre-wired strain gauges save time
Strain gauges are fitted with pre-assembled connecting cables to facilitate handling and save time and are available in 2-, 3- or 4-wire configurations.
HBM's latest strain gages are fitted with pre-assembled connecting cables to facilitate handling and save time and are available in 2-, 3- or 4-wire configurations The variations are each mounted on a common carrier with every strain gage having two teflon-coated wires attached to it
This article was originally published on Manufacturingtalk on 20 Apr 2004 at 8.00am (UK)
Related stories
Amplifier increases press-fit assembly accuracy
A measurement amplifier simplifies two-channel manufacturing and testing processes, such as press-fit monitoring, to ensure greater fitting accuracy.
The strain gages have been designed to be easier to fit by inexperienced or infrequent users.
They are easier to fit in difficult areas and there is no need to solder the gages onto delicate or sensitive areas.
Strain gages (SG) measure very small deformations on moving or mechanically loaded test objects.
HBM supplies a wide range of additional data acquisition and analysis equipment to allow forces and stress states to be determined with very high degrees of accuracy.
HBM also provides seminars and hands-on workshops to help end-users improve their knowledge and practical experience of strain gage technology. Request a free brochure from HBM UK ...
• HBM UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
