Product category:
Deburring, de-flashing and fettling
News Release from: Hydrafeed | Subject: Vanco barreling and abrasive band machines
Edited by the Manufacturingtalk Editorial
Team on 10 February 2003
Finishing machines can accompany machine
tools
Barreling machines and abrasive belt machines, widely used in finishing departments, can also be used at the side of machine tools to finish off machined components.
Apart from being the only UK manufacturer of CNC Bar Feeds, Hydrafeed have also manufactured the Vanco range of Deburring equipment for the last 40 years, and although machine tools have become more and more sophisticated in that time, the old devil burrs can still cause problems Vanco Barreling machines ranging from 1/6 of a cubic ft up to 6 cubic ft capacity, and offer a mass deburring system for components, with results that vary from de-scaling and deburring through to high polish surface finishes
This article was originally published on Manufacturingtalk on 1 Nov 2002 at 8.00am (UK)
Related stories
Bar stacker ups short bar feeders capacity by 10X
A multi bar stacking device allows CNC Lathe users to increase the magazine capacity of their Multifeed Short CNC Magazine Barfeed by up to 10 times the standard capacity.
The Vanco Flexiband vertical abrasive belt machine range offers the capability to deburr using abrasive belts from 1/4in (6mm) to 4in (100mm) wide.
An example of the versatility and efficiency of Vanco Flexiband machines is their use at the side of vertical machining centres where simple accurate deburring can achieved while the VMC is going through it's cycle.
All Vanco units come complete with a 1-year unconditional guarantee and are built to the highest specification, allowing years of uninterrupted operation and reliability.
• Hydrafeed: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
