Product category:
Drives, motors and power transmission, couplings, clutches
News Release from: Heason Technology | Subject: Miniature gear unit
Edited by the Manufacturingtalk Editorial
Team on 03 July 2002
Miniature gear unit offers high
performance
Engineers calling for devices to become smaller, and with no reduction in performance or quality, an extra-extra small precision gear unit measures just 8mm in diameter by 1mm in depth.
Measuring just 8mm in diameter by 1mm in depth, this backlash-free gear has a reduction ratio of between 500:1 and 1000:1 It provides a highly efficient torque increase and achieves a repeatability accuracy of a few second of arc
This article was originally published on Manufacturingtalk on 7 Apr 2008 at 8.00am (UK)
Related stories
Heason X-Y Positioning stage is neat and complete
A novel range of ready-to-run single-axis and X-Y positioning stages by Heason Technology are modular and offer reduced integration costs for a wide range of applications.
Z-axis miniature auto-focus stage introduced
A Z-axis miniature auto-focus stage combines ceramic motor, encoder, precision bearings and counterbalance for positioning and focussing in microscope and imaging applications.
Its maximum output torque is 10micro-Nm at an output speed of 100 rpm.
To manufacture this minute gear, which is based upon Harmonic Drive's unique Wave Generator, Flexspline and Circular Spline construction, a special production technique has been developed.
Whilst conventional methods of gear production can be used down to a module of 60 - 100 micron depending on the tooth geometry, there are significant restrictions on optimal tooth geometry if conventional techniques are applied to manufacture a gear with a module within this range.
Further reading
DC motors outperform conventional iron core models
Heason Technologies has introduced the AST disc armature brushed DC motor with exceptional dynamic performance and compact design.
Tripods and hexapods for nano positioning
Heason Technologies has announced Alio's tripod and hexapod nano positioning manipulators, which use parallel kinematics for superior positioning control.
As a result, micro-technological methods, such as the LIGA-process, have been employed for the manufacture of the micro gear's components.
Typically, these methods are derived from processes for the production of semiconductor components and utilise lithographic techniques.
Horizontal dimensions are represented in a blocking absorber coating on a mask and are projected precisely into a photo resistant material during exposure.
In order to achieve structures with heights up to several millimetres yet with tolerances better than 1 micron on horizontal dimensions it is necessary to use a Synchrotron X-ray source.
This provides high-energy, short-wavelength, highly parallel x-rays that minimise refection and scattering in the photo-resist and so make high-aspect ratio, highly accurate structures possible.
However, these initial 3D structures are expensive to produce so a different, more cost-effective forming process is required to replicate the highly accurate structures on a commercial basis.
Consequently, a new production technique had to be developed for the manufacture of micro metal components.
The new technique (patent applied for) is based upon the LIGA process, with a special forming process, a 'second galvanoforming'.
X-ray lithography is used to produce highly accurate master moulds that can be reproduced using cost-effective mass production processes, such as plastics injection moulding.
These plastics structures serve as last moulds for the second galvanoforming step.
In this phase, metal is deposited in the last moulds by galvanoforming, so enabling the high volume production of miniaturised metal gear components.
"These precision microgears are a key enabling technology for a new generation of miniaturised devices in a wide range of application areas", says David Wheeler, managing director, Heason Technologies Group.
He went on, "They are ideally suited to precise positioning applications in optics, medical equipment, semiconductor manufacture, robotics, laser technology and biotechnology".
• Heason Technology: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
