Product category:
Machine and production line ancillaries, miscellaneous equipment
News Release from: HepcoMotion | Subject: Gradient Grinder
Edited by the Manufacturingtalk Editorial
Team on 12 April 2001
Gradient grinder grooves marble easily
Until the introduction of the Gradient GrinderT, kitchen furniture manufacturers and stonemasons had little option but to create drainage holes in marble and granite worktops by hand.
Until the introduction of the Gradient GrinderT, kitchen furniture manufacturers and stonemasons had little option but to create drainage holes in marble and granite worktops by hand Typically, it would take a craftsman up to three hours to cut and polish the grooves, a procedure which not only tied-up equipment such as saw benches but could also be dangerous
This article was originally published on Manufacturingtalk on 3 Feb 2000 at 8.00am (UK)
Related stories
High load lifting units assembled to order
Winkel builds complete high load lifting units to meet customer's specific needs and Hepco is pleased to extend this service to UK companies.
Large range of ballscrews delivered promptly
Hepco Slide Systems is confounding its competitors with super fast lead times on its Fastline ballscrew range.
Gradient Grinder is the invention of stonemason Nick Browne, MD of Medway Marble.
It can complete a set of six drainage grooves in as little as 30 minutes, including setting time.
Quality of cut is crucial to the elimination of secondary finishing and to achieve the smooth, straight and controlled movement of the on-board FlexT cutting mechanism, Mr.Browne chose the Hepco GV3 linear slide system and Pacific SimplicityT bearings.
Further reading
Locking device provides safe platform
The extensive menu of design elements within Hepco's GV3 linear slide programme allows specifiers to create the optimum linear motion system to suit both application and budget.
System building expertise saves money
Designers interested in Hepco's system-building capability could do no better than pay the company a visit.
Designed to be portable for use on site, the hand-operated Gradient Grinder is basically an x-y axis rig which clamps onto the worktop to be cut.
Hepco's SB beam comprises the vertical 'x' axis and is used in the inverted position so that the carriage plate locks onto the horizontal 'y' rail; a handle is joined to the end of the beam.
The single Hepco Pacific SimplicityT bearing employed on the 'y' axis provides both linear and rotary motion.
This bearing allows the beam to be indexed to - and locked at - each groove cutting position and also for it to be lifted upwards for repositioning.
Contd./ - Water is essential to the cutting process and when this is combined with stone dust, a relatively hostile environment is created.
Both Hepco products used in the Gradient Grinder benefit from designs which have the ability to operate maintenance-free in such conditions.
The GV3 carriage mounted on the SB beam is equipped with Hepco's unique cap wiper system which prevents any ingress of dirt or debris on the slide mechanism.
The long-life Simplicity bearing will not catastrophically fail even in the most arduous of applications and incorporates a Frelon 'J' self-lubricating liner, bonded into the housing.
"On early models of the Gradient Grinder, we used rods and rollers to guide the cutting head but these tended to bend even when the 'x' slide was only slightly extended," Nick Browne explained.
"The Hepco products which are now central to the new design give us exceptional rigidity, providing 'grab' free motion and no yawing (deviation from course)." So successful is this new engineering formula that Nick Browne has been able to add value to his Gradient Grinder by extending its application potential.
By removing the gradient bar and substituting it with a shaped profile - known in the trade as a forma - the rig can now be quickly adapted for cutting the curved legs on fireplaces which are currently in vogue. Request a free brochure from HepcoMotion ...
• HepcoMotion: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
