Product category:
Actuators, motion systems, etc
News Release from: HepcoMotion | Subject: BSP Ballscrew Premier Series
Edited by the Manufacturingtalk Editorial
Team on 24 March 2005
Ballscrews come with many size options
Easy selection, good availability and very competitive price characterise a compact range of rolled and ground ballscrews in a single DIN nut format.
True to form, the new HepcoMotion BSP Ballscrew Premier Series has been designed with options to suit a range of applications These high quality ballscrews and supports are available in a wide range of off-the-shelf sizes and in a choice of grades
This article was originally published on Manufacturingtalk on 26 Jun 2008 at 8.00am (UK)
Related stories
Screw jacks are corrosion resistant
Screw jacks are c orrosion resistant for lifting of any load under chemical or moisture conditions or where hygienic and contaminant-free operation is wanted.
Universal linear motion system offered
A universal linear motion system offers a wide range of sizes, types and precision grades to meet most automation application needs.
Easy selection, good availability and very competitive price characterise this latest introduction.
Ballscrew Premier is a compact range of rolled and ground screws in a single DIN nut format with a range of high lead and miniature screws.
The most popular sizes are available ex-stock.
These 'rapid dispatch' components are of single nut DIN flange design and incorporate grade C7 rolled screws with nuts that either have A0 controlled play or A1 controlled play.
These ballscrews will suit most applications where medium accuracy and short lead-time are the principal criteria.
For the more pre-load critical application, HepcoMotion offers the same range with a C5 ground screw and an A2 lightly pre-loaded single nut.
Complementing the series are high lead (BSPH) and miniature screws (BSPM) covering rolled C7 and ground C5 grades; C5 ground screws have a maximum lead deviation of 0.018mm per 300mm and C7, 0.050mm.
Any combination of accuracy and pre-load can be supplied across all types.
All ballscrews are supplied, as standard, with the ends machined and the nut assembled onto the screw; bespoke machining and other special requirements can of course be accommodated.
A choice of supported-end and fixed-end bearing housings complete the programme. Request a free brochure from HepcoMotion ...
• HepcoMotion: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
