Product category:
Robots and robotic systems
News Release from: Hoerbiger-Origa | Subject: Robotic handling and manipulation
Edited by the Manufacturingtalk Editorial
Team on 21 March 2003
Robots precision movements applied to
toilets
Making sure a robot lines up to a toilet with absolute precision and ensuring that moulds are moved with a smooth motion profile were the requirements listed for efficient handling.
Making sure a robot lines up to a toilet with absolute precision and ensuring that moulds are moved with a smooth motion profile was the key criteria identified by Hoerbiger-Origa when it was called into Kings Lynn-based Porvair Ceramics Ltd Porvair Ceramics (part of the Porvair group of companies) is an OEM that builds ceramic moulding machinery and moulds for the sanitaryware, tableware and advanced ceramic industries
This article was originally published on Manufacturingtalk on 26 Jul 2007 at 8.00am (UK)
Related stories
Valve automates condensate management
An automatic drain valve expands the operating range of the Airfit range of air preparation filters, regulators and lubricators in terms of temperature and pressure.
Mechanical engineers avoid the public gaze
Ray Barnes, managing director of pneumatics and linear motion specialist Hoerbiger Origa, discusses his concern that engineers are not getting enough recognition.
The loads and pressures involved in moulding larger items, such as toilet bowls, require that the mould parts have to be reinforced with a steel frame and so can weigh up to 1.2 tonnes each.
Opening the moulds and transferring the unfired, and thus delicate, bowls to the kilns is a task that requires a feather-like touch, despite the huge loads involved.
Porvair's pressure casting machines have up to 16 moulds (8 on a toilet making machine); for a toilet bowl each mould comprises four parts; top, bottom and two sides.
Further reading
The pneumatics industry decade by decade
Ray Barnes, Managing Director of Hoerbiger-Origa examines the pneumatics industry by looking at ten-year periods, and ponders what the future holds.
Less is more on high speed scribing machine
Hoerbiger-Origa has supplied rodless pneumatic cylinders to Robotix, which has developed an automated production line for scribing traceability serial numbers onto wheel rims.
Pneumatic compact cylinders conform
Hoerbiger-Origa's range of pneumatic compact cylinders that conform to the latest ISO 21287 standard has been expanded.
These are all suspended from an overhead beam, which forms an integral part of the machine's frame, and effectively move along the beam as each is opened in turn for demoulding of the 'green' bowls.
The support of each mould utilises three carriages, one of which also carries a pneumatic cylinder to raise and lower the bottom mould.
In use the moulds are closed by a hydraulic ram and clay slurry is pumped into the mould.
Air pressure is then applied to form the hollow toilet bowl against the mould's internal surfaces and also to help drain excess liquid from the clay.
De-moulding then involves the sequential opening and closing of each mould in turn.
This process is fully automated, using a coupling device that is traversed over the length of the overhead beam by a servo-driven linear actuator.
The actuator is synchronised with the operation of a demoulding robot, which travels along an axis parallel to that of the overhead beam so that it is adjacent to each mould as it is opened.
The actuator is over six metres long, so when building the machine Porviar found that the number of potential suppliers was limited.
After reviewing the alternatives Porvair specified actuators manufactured by Hoerbiger-Origa, which has an enviable track record for long stroke, high accuracy units.
Working with Hoerbiger-Origa's specialist motion engineers, it was decided to use a servomotor is from Control Techniques, controlled by a dedicated Rockwell PLC, which works alongside a machine-wide PC-based SCADA system.
All of the mould suspension carriages on the Porvair machine are connected to one another by a system of scissor linkages.
The motion imparted by the linear actuator to an individual mould part is proportionally transferred to that mould's carriage such that when the mould is fully open the robot is centrally positioned between the two largest mould parts.
Additionally, as one mould is opened the preceding mould, which as already been demoulded, is closed.
The linear actuator also connects four air supplies to the moulds through the carriage engagement tool as they are opened.
Solenoids mounted on the moving carriage of the actuator control a supply of air to the open mould to assist demoulding.
Positional accuracy of the linear actuator relative to the current position of the robot is ensured by a laser sensor mounted on its moving carriage and reflectors mounted on each moulds' suspension carriages.
Hoerbiger-Origa was a natural choice for Porvair, because it offers all linear actuation technologies so can be completely objective in its assessments and specifications.
With both hydraulic and pneumatic systems already specified elsewhere on the machine, these were considered.
However it decided against pneumatics because of the load and accuracy requirements, and hydraulics were rejected because of cost, speed and maintainability.
This left electric servodrives, with a belt or ballscrew or rack and pinion for rotary to linear conversion.
Normally a ballscrew is chosen for high accuracy, high load work, however these become very expensive for long strokes and over 6m tend to suffer from whip.
Rack and pinion is problematically due to lubrication requirements (no oil or grease must come into contact with the moulds) and the problems associated with the motor having to be mounted on the moving carriage.
Luckily one of the steel laced polyurethane belt options offered by Hoerbiger-Origa is specifically designed for large load precision accuracy over extended strokes.
The actual model of actuator is the 50BHD.
Like all Hoerbiger-Origa units this is based on a standard aluminium extrusion, this being one of the larger ones with a 50mm diameter internal bore through which the toothed belt runs.
This has integral roller guides and bearings and is supplied as a ready to fit mechatronic sub-system.
Although not exploited in this case, the BHD extrusion is so rigid that they are often used as main load carrying members within a machine's frame.
Further, the mounting arrangement is such that configuring multi-axis systems is completely straightforward. Request a free brochure from Hoerbiger-Origa ...
• Hoerbiger-Origa: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
