Product category:
Pneumatic equipment
News Release from: Hoerbiger-Origa | Subject: NZ range of compact pneumatic cylinders
Edited by the Manufacturingtalk Editorial
Team on 26 May 2004
Compact pneumatic cylinders pre-empt new
standard
Compact pneumatic cylinders of small-bore sizes, whose introduction pre-empt the new standard ISO 21287 that comes into effect later this year, are 45% shorter than standard cylinders.
The NZ range of compact pneumatic cylinders has been extended by Hoerbiger-Origa to embrace more small-bore sizes, pre-empting the new standard ISO 21287 that comes into effect later this year The extended range now encompasses new standard bores of 12mm, 16mm, 20mm and 25mm, as well as the previous 32-100mm bores
This article was originally published on Manufacturingtalk on 19 Apr 2004 at 8.00am (UK)
Related stories
Mouse-sized pressure control valve is intelligent
Smaller than a computer's mouse, an intelligent proportional pressure control valve uses a piezo chip which functions as a continuously operating 3/2 way pilot control valve.
Due to an innovative end-cap design the NZK compact cylinders are typically 45 per cent shorter than standard cylinders, yet deliver the outstanding output force, rigid guidance and positional accuracy associated with Hoerbiger-Origa actuators.
Highly efficient end buffers are built into the end caps to provide for quiet, shock-free operation.
The larger diameter piston rod and bearings together ensure smooth travel and optimum side load capabilities.
The design of the actuator body is such that the overall dimensions are little more that the stroke, but without compromising rigidity in any direction nor the smoothness of the stroke motion.
To provide smooth running, even at slow speeds, and eliminate stick/slip at start up, the internal air seals are designed with small lip profiles.
These are also moulded in a highly wear resistant polymer to ensure long life expectancy.
Both single acting and double acting drive power options are available, as are a number of mounting options and accessories. Request a free brochure from Hoerbiger-Origa ...
• Hoerbiger-Origa: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
