Product category:
Drives, motors and power transmission, couplings, clutches
News Release from: Huco Dynatork | Subject: Kerk Spline Shafts
Edited by the Manufacturingtalk Editorial
Team on 01 July 2002
Aluminium spline shafts are for light
loading
Lightweight aluminium spline shafts are recommended where low cost, light loading, low friction and long life are the primary design criteria.
The new Kerk Spline Shafts from Huco are the ideal choice where low cost, light loading, low friction and long life are the primary design criteria Available in two types and in three sizes respectively, the lightweight aluminium spline shafts are treated as standard with Kerk's proprietary low friction TFE coating
This article was originally published on Manufacturingtalk on 25 Feb 2000 at 8.00am (UK)
Related stories
Coaxial screw rail saves space and cuts costs
Huco's new, integrated lead screw and rail system - Kerk 'S' Rail - is a boon for designers looking for space savings.
The graphite and PTFE filled thermoplastic bushing that completes the assembly is supplied with integral brass collar to facilitate various mounting configurations without nut distortion.
Standard shaft straightness is.25mm/m and typical radial and torsional clearance between shaft and bushing for the basic SSB assembly is.050-.076 mm.
Model SSZ provides an anti-backlash assembly for applications requiring additional system stiffness.
The three shaft diameters available are 6.35mm, 9.53mm and 12.70mm, all in any length up to 3m.
In common with all Kerk assemblies, requirements for special bushing configurations and end machining can be accommodated. Request a free brochure from Huco Dynatork ...
• Huco Dynatork: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
