Click on the advert above to visit the company web site

Product category: Welding ancilliaries
News Release from: Huntingdon Fusion Techniques | Subject: Pipe/tube stoppers
Edited by the Manufacturingtalk Editorial Team on 26 April 2007

Stoppers seal any tube from 12-162mm
diameter

Any pipe or tube from 12-162mm diameter can be sealed - for purging during, say, welding - with a recently enlarged range of expandable plugs.

The expandable plugs product range manufactured by Huntingdon Fusion Techniques has been further developed and a matching plug can now be provided to seal any tube over the entire diameter range from 12 to 162mm With the increasing ranges of tubes and pipes and the variation of materials, effective sealing some of the diameters has been beyond conventional plug sizes

The introduction of additional 'between size' diameters in the 12 to 115mm range now completes a comprehensive portfolio which can be used with confidence in a very wide range of end-user industries but in particular in the building sector where they are extensively used for drain plugging prior to undertaking sealing tests.

Pipestopper plugs are manufactured from Nylon 6, an engineering plastics, which combines impressive resistance to corrosion with high mechanical strength.

The sealing rings are expanded easily using a screw mechanism and can be supplied in silicone, nitrile, viton or natural rubber depending n the specific application.

Most sizes have a 1/2in BSP threaded waterway for drainage or air testing. Request a free brochure from Huntingdon Fusion Techniques ...

• Huntingdon Fusion Techniques: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page

Search the Pro-Talk network of sites