Product category:
Monitoring and sensor equipment and systems
News Release from: Impac Infrared | Subject: Fully digital pyrometers
Edited by the Manufacturingtalk Editorial
Team on 25 July 2006
Digital pyrometers fit in confined
spaces
Fully digital pyrometers - for where space is limited - can be used in ambient temperatures upto 180 deg C without cooling and integral LC display shows the actual temperature reading.
For temperature measurement applications where space is limited the new IN 510/520 pyrometers from IMPAC Infrared are the ideal solution These fully digital pyrometers can be used in ambient temperatures upto 180 deg C without cooling
This article was originally published on Manufacturingtalk on 27 Apr 2004 at 8.00am (UK)
Related stories
Blackbody sources check infrared thermometers
Continuous development has resulted in comprehensive range of blackbody sources for the calibration of infrared thermometers, thermal imaging cameras, radiometers and heat flux meters.
The integral LC display shows the actual temperature reading and all parameters can be set up using an internal keyboard.
Where a local display is not required the IN 510/520-N models can be used, giving an additional cost saving.
The pyrometers can measure temperatures in the range ?40 to 700 deg C with a choice of 2:1 or 10:1 optics.
The miniature optical head is attached to the electronics module via either a 3m or 15m cable.
A selection of outputs is available, including current and simulated thermocouple.
All models have a switchable RS232/485 interface and an isolated relay output.
These feature packed digital pyrometers offer high precision measurements at an affordable cost.
• Impac Infrared: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
