Product category:
Pharmaceutical/medical manufacturing: production equipment
News Release from: Intertronics | Subject: Thinky ARE-250 Mixer
Edited by the Manufacturingtalk Editorial
Team on 13 December 2007
Checking powder mixing consistency
A mixer mixes, disperses and degasses materials in seconds to minutes, in a sealed or lid-less container such as a jar, beaker, syringe barrel, or cartridge.
"Mixing it?" - sorted with Thinky Cera Dynamics had relied for many years on a manual mixing system for their research and quality control of specialist glass powders, but embarked on a search for a process solution that would be more effective, more consistent, quicker and simpler
This article was originally published on Manufacturingtalk on 13 Mar 2006 at 8.00am (UK)
Related stories
Bench top dispensing robot is very affordable
A bench top Cartesian dispensing robot - with prices beginning at GBP 4000 - brings robotic dispensing within reach of small assembly shops as well as the larger companies.
Mask resins replace lacquers, wax, tape, fixtures
Masking resins replace lacquers, wax, tape and fixtures that save time in metal finishing processes are ideal for complex sensitive shapes and fully protect critical surfaces.
The glass powders produced by Cera Dynamics are tailored to customer need - primarily for dental fillers and restorers, they vary from 0.5 to 10 micron average particle size.
For testing purposes the glass powder needs to be mixed with a high viscosity acrylic resin monomer to check for high transparency and low discolouration, but the manual process, while well understood, continued to give problems of non-homogeneity and air inclusion, both of which preclude colour checking of the glass.
The search for an improved system led Dr Philip Frampton to the industry standard vacuum mix machine - excellent for 100 to 200g but not suitable for 10g samples - also to a purely planetary mixer which was found to enfold too much air - and ultimately to the new Thinky ARE-250 from Intertronics, which incorporates both planetary mixing and centrifugal degassing in one unit.
Further reading
Lead-free manual soldering - check the problems
Specialists have noticed that being RoHS compliant and lead-free brings all sorts of new issues - so they believe that now is the time to look at manual soldering, - such as solder/desolder tips.
Cordless adhesives dispenser is drip-free
Cordless twin-pack adhesives dispenser is said to be ideal for repetitive application of adhesives or sealants from twin pack cartridges where the adhesive has to be taken to the workpiece.
UV curing flood lamp for adhesive mountings
The IUV 250 UV curing flood lamp has been developed in response to customer needs and provides a high intensity, versatile UV flood source for hand held or fixed mounting.
Tests with the Thinky equipment involved mixing 60% glass with 40% acrylic by weight in viscosities varying from "thick honey to stiff bubble gum," according to Dr Frampton.
Empirical investigation supported by advice from the Intertronics engineers rapidly determined suitable program parameters based on viscosity and these samples were then pressed and cured into standard GBP2 coin sized discs for comparison with established colour standards.
Dr Frampton explained "Cera Dynamics are one of probably only 4 or 5 companies in the world operating at the top level in this technology and we were looking to improve the mixing stage as a first step to overall improvement of our glass grinding process.
Intertronic's expertise and supply of the Thinky mixer has allowed us to achieve that initial goal in a single operation.
So now we have a reliable quality control process we can move to purchase of a spectro-photometer.
This will enable us to refine our operation further toward development of an even cleaner and finer grinding process." The Thinky ARE-250 Mixer allows for the process of mixing and bubble removal to be carried out simultaneously.
It mixes, disperses and degasses materials in seconds to minutes, in a sealed or lidless container such as a jar, beaker, syringe barrel, or cartridge.
The non-contact mixing principle makes it possible for formulation of compounds from very small amounts such as 0.5ml to production quantities of 310g.
The ARE-250 may be used to formulate and mix adhesives, sealants, moulding compounds, lubricants, slurries, coatings, inks, paints, abrasives, bio chemicals, cements, medical compounds, cosmetics/personal care materials, detergents, conductive pastes, dental materials, foods, construction materials or any other materials which are hard-to-mix, hard-to-degass, or hard-to-wet.
The Thinky ARE-250 Mixer works by revolving and rotating the container in a planetary manner at various speeds with both overall and planetary rotational speeds independently pre-programmable.
Centrifugal force presses the material outwards to the inner wall of the container.
Other forces cause the material to move downwards in a spiralling direction along the slope of container wall.
The material then moves back to the centre of the container and up to the top.
As a result, material circulation from top to the bottom generates kneading effects, forcing trapped air out of the material.
This ensures no cross-contamination between batches, no damage to material from rollers, mixing blades or propellers and no unit cleaning between batches, as well as allowing re-mixing of separated materials to prolong shelf life.
Consequently, process cycles may be reduced, lowering costs and improving yield rates.
The whole non-contact programmable approach greatly improves consistency of quality and improves formulation irrespective of operator skill levels.
Further information regarding Intertronics' products can be found on the website.
• Intertronics: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
