Product category:
Non Destructive Testing
News Release from: Indentec Hardness Testing Machines | Subject: Robotic digital Vickers hardness testing machine
Edited by the Manufacturingtalk Editorial
Team on 11 October 2002
Robotic hardness tester installed in
Spanish mill
Believed to be the first robotic digital Vickers hardness testing machine, it has been installed in a Spanish stainless steel mill for checking prepared stainless steel specimens.
Indentec believes it is the first to engineer a digital Vickers hardness testing machine for fully robotic operation The Stourbridge Company has eliminated the human interpretation of hardness indentations by developing software to convert the results from a computer-aided measurement system (CAMS)
This article was originally published on Manufacturingtalk on 10 Jul 2002 at 8.00am (UK)
Related stories
Stainless steel robotically hardness tested
Believed to be the first that a digital Vickers hardness testing machine has been adapted for robotic operation, a system has been configured for a Spanish stainless steel plant.
Simultaneously Vickers test up to twelve surfaces
No less than nineteen different specimens can be supported for hardness testing by a single fixture developed by Indentec.
Vickers hardnesses are determined by CAMS and downloaded to computer automatically.
With no operator involvement, there is no risk of error, misjudgement or inconsistency in the readings.
For a Spanish manufacturer of stainless steel, the machine forms part of a robotic test cell that will work unattended for twenty four hours a day seven days a week.
Using transfer mechanisms driven by signals from the software, the cell will check the dimensions, surface finish, hardness and tensile strength of prepared stainless steel specimens.
The testing machine receives and registers specimens from the transfer mechanism.
It clamps each specimen in turn and brings it to the test position by motorised lead screw until the specimen surface has been sensed electronically.
The first of three Vickers tests is carried out, the machine's optical system focussing automatically for the automatic computer measurement of the indentation.
When the three tests are completed, the results are averaged by the software and the test readings and the averages are transmitted to the host computer along with the specimen related data.
The specimen is then transferred automatically to the next check.
The machine is based on a standard Indentec digital Vickers tester with a built-in touchscreen for controlling operation and monitoring.
• Indentec Hardness Testing Machines: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
