Product category:
Electronics manufacturing: equipment, automation, software
News Release from: Integrated Dispensing Systems | Subject: Micro-MeterT 2 Meter Mix Dispense System
Edited by the Manufacturingtalk Editorial
Team on 24 April 2003
Dielectric gel dispensed accurately in
1cc shots
A contract electronics manufacturer has acquired a specialist machine to accurately dispense 1.00cc of a mixed 2 part Shin-Etsu X-832-050 Silicone Dielectric Gel onto a HV circuit assembly.
A leading contract electronics manufacturer in Glasgow, Scotland required a specialist machine to accurately dispense 1.00cc of a mixed 2 part Shin-Etsu X-832-050 Silicone Dielectric Gel onto a high voltage circuit assembly The specialist Gel had to be sourced from the USA via the Netherlands to meet the products exacting specifications Integrated Dispensing Systems supplied their Micro-MeterT 2 Meter Mix Dispense System to match the customer's detailed equipment needs
This article was originally published on Manufacturingtalk on 25 Jun 2001 at 8.00am (UK)
Related stories
High viscosity adhesives dispensed efficiently
Designed to process high-viscosity materials, the SeeFlo 494 is ideally suited for dispensing structural adhesives widely used throughout manufacturing for structural bonding.
Easy potting improves automotive electrics
This potting operation is smooth and predictable, allowing a single operator to produce four 80-pin power train connectors every 20 seconds.
The Micro-MeterT 2 is an air operated, positive displacement, single acting, two-component system, designed to meter / mix, and dispense small 'shots', or beads, of reactive materials.
The Micro-MeterT 2 features precision shot size and flow rate control, positive displacement meter, Teflon rod packings, integrated power inlet and outlet valves (to control the A/B fluid direction during reload and dispense) and a PLC logic control panel.
Each meter is configured to accommodate the ratio and shot size requirements of the clients application.
The Micro-MeterT 2 utilizes No-FlushT disposal static mix tubes and protective shrouds.
For very small dispense volumes, the mixer assembly can be fitted with a Luer-Lok adapter and needle.
Features - * Point of application dispensing.
* Readily integrated into automated applications through PLC.
* Precisely meter small volumetric shots of 2 component mixed materials.
* Minimum shot size:.02 cc/shot (1:1 pbv ratio).
* Maximum shot size: 3.52 cc/shot (1:1 pbv ratio).
* Dispense volume repeatability with cpk 13 achievable.
* Positive displacement meter, single acting.
* Power inlet and outlet valves.
* Dispense and reload rate control.
* Use with low or high viscosity materials.
* No-Flush disposable static mixers with Luer-Lok adapters.
Depending on the material's properties and the amounts used, the supply device could be a cartridge, pressure tank, or pump.
The fluid supply device is attached to the Micro-Meter's inlet ports and supplies the two material components to the Micro-MeterT 2 under pressure.
The micrometer style shot size adjustment controls the amount of material that is metered and dispensed during a cycle.
This adjustment varies the stroke of the meter rods to control the volumetric output.
• Integrated Dispensing Systems: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
