Product category:
Dispensing, filling and weighing systems
News Release from: Integrated Dispensing Systems | Subject: MicroMeter III meter/mix system
Edited by the Manufacturingtalk Editorial
Team on 24 June 2003
Meter/mix system dispenses precision
beads
Servo-driven meter/mix system dispenses precision beads of mixed, two-component reactive resins including patterns with a complex bead path.
The servo-driven MicroMeter III meter/mix system dispenses precision beads of mixed, two-component reactive resins (silicone, epoxy, etc.) The system is designed to dispense micro-beads whose total volume is from 0.02 cm3 to 3 cm3, depending upon the ratio
This article was originally published on Manufacturingtalk on 25 Jun 2001 at 8.00am (UK)
Related stories
High viscosity adhesives dispensed efficiently
Designed to process high-viscosity materials, the SeeFlo 494 is ideally suited for dispensing structural adhesives widely used throughout manufacturing for structural bonding.
Dispensing precision beads with a servo system - including patterns with a complex bead path - is faster and easier with the MicroMeter III system than ever before.
The user can vary the dispense flow rate with a 0 - 10VDC signal to the servo controller, which is readily interfaced with the automation.
The MicroMeter III system's components are remote mounted since many applications use a small XYZ table.
Only the dispense valve is fixtured over the part.
This remote mounting makes both the meter and controls easily accessible.
As part of the MicroMeter family, the MicroMeter II air-powered systems are used for precision shot-dispensing applications.
MicroMeter systems feature power inlet and outlet valves, coupled positive-displacement metering cylinders and rods to insure metering and flow rate consistency.
The components are designed for easy mounting and the controls readily integrate with your automation.
• Integrated Dispensing Systems: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
