Product category:
Dispensing, filling and weighing systems
News Release from: Integrated Dispensing Systems | Subject: V200 Stroke Rate Controller for FMI V-Series pumps
Edited by the Manufacturingtalk Editorial
Team on 04 May 2004
Stroke rate controller precisely
controls metering
Stroke rate controller precisely controls a range of variable speed metering pumps, allowing speed settings to be manually adjusted or through a PLC interface.
Integrated Dispensing Systems introduces the V200 Stroke Rate Controller for precision control of all FMI V-Series Variable Speed Metering Pumps The V200 is designed for accurate fluid metering in laboratory R and D, test stand, pilot plant, process, and production applications The V200 Controller allows pump speed settings to be adjusted either manually in 0.1% increments using a convenient on-board digital potentiometer, or through an electronic 4-20mA interface ideal for PLC and process instrumentation
This article was originally published on Manufacturingtalk on 25 Jun 2001 at 8.00am (UK)
Related stories
High viscosity adhesives dispensed efficiently
Designed to process high-viscosity materials, the SeeFlo 494 is ideally suited for dispensing structural adhesives widely used throughout manufacturing for structural bonding.
Easy potting improves automotive electrics
This potting operation is smooth and predictable, allowing a single operator to produce four 80-pin power train connectors every 20 seconds.
The V-200 is capable of variable control of fluid flow from 0 up to 4 litre/min in both forward and reverse directions (depending on pump head and drive configuration).
Changing from manual to electronic control, as well as changing flow direction, is easily accomplished using convenient front mounted toggle switches.
The V200 is compatible with Fluid Meteringxs RHV, QV, QVG, and Q2V Ratio:Matic pump models providing flow ranges from 0 to 4 litre/min (60 gal/hr) at pressures up to 100 psig (6.9 bar).
When used with the Q2V Ratio:Matic Dual Pump Drive, exceptional proportional metering of two fluids with ratios of up to 500:1 can be accomplished.
The V200 is equipped with a versatile multi-position stand with key slot holes suitable for both wall mounting or counter top operation.
Fluid Metering also offers a variety of accessories for their pumps and dispensers including low flow fittings, rotational sensors, pulse dampeners, and a dial indicator for ultra-fine adjustment of flow rate settings.
FMI is certified as compliant with ISO 9002 quality standards.
• Integrated Dispensing Systems: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
