Product category:
Maintenance planning, services and equipment
News Release from: Schaeffler (UK) | Subject: Mounting and dismounting of rolling bearings
Edited by the Manufacturingtalk Editorial
Team on 17 March 2006
Tools aid mounting/dismounting rotating
parts
Two products which help to speed up, simplify and make safe the mounting and dismounting of rolling bearings and help to prevent unnecessary damage.
Two new products which help to speed up and simplify the mounting and dismounting of rolling bearings are now available from Schaeffer UK Both products will help to prevent unnecessary damage when mounting rolling bearings and will also increase worker safety on site
This article was originally published on Manufacturingtalk on 2 Sep 2003 at 8.00am (UK)
Related stories
Improved track rollers offer better performance
Yoke type and stud type track rollers contain needle rollers or cylindrical roller bearings with a profiled outer ring and can support high radial forces and axial guide forces.
12m linear guidance system cuts welding downtimes
It is not every day that a bearing company is asked for a 12m linear guidance system, but that is Lansing Linde needed to cure excessive downtimes on a computer controlled welding machine.
The new FAG rolling bearing mounting tool kit offers quick, precise and safe mounting for small bearings with bore diameters ranging from 10-50mm.
Where tight fitting inner or outer rings are to be driven onto a shaft or into a housing bore, hammer blows can be applied to an appropriate mounting sleeve with a mounting ring.
The right combination of mounting sleeve and mounting ring ensures that the mounting forces are never transmitted via the rolling elements of the bearing, whilst also guaranteeing an even transmission of mounting forces to the bearings rings.
The Fitting.Tool.ALU.Set10-50 is easy to use and can be used to mount a wide variety of rolling bearings.
The tool kit contains 33 mounting rings of shock-resistant plastics, three mounting sleeves of a special design and one recoilless hammer with an anti-slip handle.
This tool can also be used in conjunction with workshop power presses and can be operated by one person.
The Puller.Internal.Set 10-100 enables fitters to dismount deep groove ball bearings in the majority of cases without having to dismount the shaft as well.
Consisting of six sets of extraction arms and two threaded spindles made of high grade steel, it is suitable for deep groove ball bearings with bore diameters from 10-100mm.
The Puller Internal set is also easy to use and as it is lightweight only one person needs to be involved in the dismounting process.
It also comes with a practical tool case for safe and convenient storage. Request a free brochure from Schaeffler (UK) ...
• Schaeffler (UK): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
