Product category:
Bearings and guideways - rotary and linear
News Release from: Schaeffler (UK) | Subject: Bearings
Edited by the Manufacturingtalk Editorial
Team on 20 September 2007
'Grey market bearings' can be costly
Between 12 and 15% of bearing sales in the United Kingdom are made on the 'grey market' and puts end users and distributors at greater risk of costly breakdowns.
According to Schaeffler (UK), current estimates indicate that the UK's 'grey market' for bearings accounts for between 12 and 15% of total UK bearing sales Not only does a growing grey market open up routes for more counterfeit products to enter the market, It also puts end users and distributors at greater risk of costly breakdowns, litigation and void warranties
This article was originally published on Manufacturingtalk on 17 Jun 2008 at 8.00am (UK)
Related stories
Bearings made for high load/low speed applications
Integral tapered roller bearings for high load/low speed usage are easy to mount, greased for life and require no setting of internal clearance when used in an 'O' arrangement.
Split roller bearings cut production downtime
Using split cylindrical or spherical roller bearings on heavy duty machinery, such as rolling stands and extrusion machines, can reduce repair and overhaul costs on complex drive units.
How do purchasers of bearings actually know that the products they are buying are genuine and will perform as well as they say on the data sheet? Most don't have to worry because they purchase these products either direct from the bearings manufacturer or through an authorised distributor.
This method guarantees that the manufacturer meets any product warranties associated with the bearing and that any technical problems with the product are resolved quickly and efficiently.
So it's worrying that in the UK, around 15% of all bearings are currently purchased via the 'grey' market, which refers to any purchase of a bearing that is not direct from the manufacturer or via an authorised distributor.
Further reading
Catalogue describes shaft guidance systems
A free, 175-page reference guide to a range of shaft guidance systems includes linear bearings, housed units, shaft support blocks and rail guidance units.
Condition monitoring system prevents downtime
An online system monitors the condition of over 200 separate measuring points including rolling bearings, gear sets, shafts and imbalanced rotors in fans and pumps, keeping plant availability at 90%.
Linear bearing tool analyses, calculates online
Linear bearing online calculation tool analyses rolling bearings in detail, from single bearings to complex shaft or linear guidance systems, and minimises development times for machine builds.
The Internet, for example, has opened up more opportunities (and dangers!) for purchasers to buy bearings manufactured in the Far East and Africa but sold through unauthorised traders based in Europe, the Far East and Africa - indeed all across the world.
Cross-border trading is commonplace and companies often sell off their surplus bearings to unauthorised traders.
Although buying on the grey market doesn't necessarily mean that the product is not genuine, it certainly increases the risk of customers ending up with counterfeit products.
The grey market becomes an easier route for traders to supply counterfeit bearings into the UK.
So why do companies purchase through the grey market? Cost is obviously the overriding factor here.
* beware of low prices - as Des Pattinson, National Sales manager at precision bearings manufacturer Schaeffler UK, pointed out: "Although the offer price for the bearings may initially look attractive, buyers on the grey market have to ask themselves what are the potential hidden costs in terms of product liability and credibility with their customers if the product turns out to be counterfeit and things inevitably start to go wrong".
He said: "These could, for example, be critical bearings on high value machinery in a manufacturing plant.
The buyer therefore needs to take into account the cost of any production downtime if the bearing fails early." Purchasers also run the risk of not knowing how the bearings were stored, in what conditions and for how long.
So, even if the bearing is a genuine product, the manufacturer of the bearing may not support product liability and the warranty becomes void.
Pattinson offered a recent example: "A distributor bought some bearings from the grey market and asked us to analyse the products.
Schaeffler discovered that the bearings were indeed genuine product but were more than six years old.
This meant that the customer of these bearings would most likely have experienced lubrication problems that in turn could have caused costly machine breakdowns.
There could also have been other performance-related problems due to incorrect storage and handling of the bearings during that six-year period.
Under these risky circumstances, the distributor or end user of the bearing could be left totally isolated with no support from the manufacturer of the bearing.".
Buying from the grey market increases the likelihood of receiving counterfeit bearings, whether deliberately or accidentally.
Earlier this year, Schaeffler destroyed more than 40 tonnes of counterfeit rolling bearings with a nominal value of around EUR 8 million at its FAG site in Schweinfurt, Germany.
The bearings, which were INA, FAG and SKF-branded products, were seized at a Franconian rolling bearing dealer.
"The financial damage resulting from such counterfeits is difficult to quantify, even for our companies alone," commented Ingrid Bichelmeir-Bohm, lawyer and anti-piracy coordinator for Schaeffler Group.
In addition to lost sales and significant loss of image through inferior-quality goods that may affect future business, there have been enormous costs arising from the investigation, seizure and professional disposal of the bearings.
The disposal requires tight security, for only the full destruction of the counterfeits will eliminate the danger for the consumer.
But the damage affects not only the companies producing brand-name goods and investing heavily in research, development and quality assurance.
It also affects those companies that install these components.
Rolling bearings are used in virtually every piece of rotating plant and safety-critical machinery and vehicles, from machine tools, wind turbines and X-ray apparatus, through to automotive, aircraft and rail vehicles.
The Association of the German Tool Manufacturing Industry estimates that an annual 3,500 industrial accidents in Germany alone are due to counterfeit products.
According to the German Engineering Federation (VDMA), the economic damage to the capital goods industry amounts to some EUR 4.5 billion per year.
"If it weren't for brand and product piracy, there would be about 70,000 more jobs in Germany," said Doris Moller, Acting Board Member of the German Business Action Group against Product and Trademark Counterfeiting.
In conclusion, buyers can only protect themselves and their customers from fake bearings by purchasing from a 100% reliable source - by sourcing direct from the manufacturer or via an authorised distributor. Request a free brochure from Schaeffler (UK) ...
• Schaeffler (UK): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
