Product category:
Lubrication - lubricants and lubrication systems
News Release from: Schaeffler (UK) | Subject: FAG Motion Guard Champion automatic lubricators
Edited by the Manufacturingtalk Editorial
Team on 23 January 2008
Automatic lubricators on robots save EUR
45,000
A coatings company has installed automatic lubrication systems on its electroplating robots and saved EUR 45,000 over three years by ensuring bearings and guideways were well lubricated.
Applied coatings specialist, Collini Wien, has saved around EUR 45,000 during the last three years by installing automatic lubrication systems on its electroplating robots Based in Austria (Wien = Vienna), the company said it had eliminated plant downtime, which otherwise would have been caused by insufficient lubrication of linear bearings and guideways
This article was originally published on Manufacturingtalk on 2 Sep 2003 at 8.00am (UK)
Related stories
Improved track rollers offer better performance
Yoke type and stud type track rollers contain needle rollers or cylindrical roller bearings with a profiled outer ring and can support high radial forces and axial guide forces.
12m linear guidance system cuts welding downtimes
It is not every day that a bearing company is asked for a 12m linear guidance system, but that is Lansing Linde needed to cure excessive downtimes on a computer controlled welding machine.
Collini reported that it is making savings of around EUR 15,000/year after installing FAG Motion Guard Champion automatic lubricators from FAG Industrial Services (FIS).
FIS is the Schaeffler Group's condition monitoring and maintenance management organisation.
The savings come from eliminating the cost of replacement parts, production downtime and labour associated with an annual plant shutdown.
Further reading
Low temperature bearings increase spindle speeds
'Low temperature' machine tool spindle bearings operate at significantly reduced temperatures - approximately 10 degrees lower than the average - resulting in speed increases of up to 10%.
CD-rom guides engineers to 40,000 bearing products
The latest version of a product selection and information CD-rom from INA Bearing Company now incorporates the entire standard rolling bearing product catalogue of FAG Kugelfischer.
New service advises on bearing maintenance
To help its customers make maintenance programmes more effective bearing manufacturer INA FAG is offering a service giving independent diagnostic, monitoring and maintenance advice on bearings.
The electroplating plant at Collini has been in operation with the automatic lubricators for more than three years, without any disruption caused by insufficient lubrication.
* Plant shut-downs - before installing the 'FAG Motion Guard Champion' lubricators from F'IS, Collini frequently had to shut down its electroplating plant because of damage to bearings caused by insufficient lubrication.
For example, worn linear bearing units and guideways on its electroplating handling robots had to be replaced every 12 months due to wear.
This resulted in the complete plant having to be shut down for between three and seven days at a time.
The company therefore wanted to simplify its re-lubrication process and prevent any disruptions caused by insufficient lubrication.
The handling robots are 6-axis KUKA robots with a repeatability accuracy of +/-0.3mm and a rated payload of 200kg.
Arm length is 1000mm and the robots use INA linear ball bearing units and 6m long guideways, supplied by the Schaeffler Group.
In such a precise system, lubrication of bearing units is critical.
* Lubricators - experts from FIS installed multiple FAG Motion Guard Champion lubricators - filled with FAG Arcanol Multitop grease - on the linear bearing units.
Each lubricator now ensures that bearings and shafts are continuously supplied with exactly the correct volume of lubricating grease, increasing the service and maintenance intervals of the bearings significantly.
FAG Motion Guard Champion is a robust, electromechanically driven unit that operates on replaceable batteries.
The device is electronically controlled and has a back-geared motor that enables the unit to discharge lubricant at adjustable intervals of one, three, six or 12 months.
A lubricant canister is screwed to the drive unit, holding 60, 120 or 250cm3 of lubricating grease.
Automatic pressure control at 5 bar is provided and the unit operates in temperatures from - 10 deg C up to +50 deg C.
The device is also protected against dust and splash water and is immune to electromagnetic interference from surrounding equipment.
By using Motion Guard Select Manager software, the user can select the discharge interval for the application, determine replenishment quantities and select preferred lubricating greases.
FAG Motion Guard Champion and Compact lubricators can be used on all types of plant, including pumps, compressors, fans, conveyors and vehicles.
* About Collini Wien - headquartered in Hohenems, Austria, Collini specialises in finishing the surfaces of base materials by applying special coatings to them.
These coatings protect the parts from corrosion and improve the aesthetics of the material.
The company employs around 900 staff across ten production sites. Request a free brochure from Schaeffler (UK) ...
• Schaeffler (UK): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
