Product category:
Milling cutters
News Release from: Iscar Tools | Subject: DropMill endmill
Edited by the Manufacturingtalk Editorial
Team on 19 March 2003
Ball-nose endmill intended for high
speed finishes
Ball-nose endmill performs semi-finishing and finishing applications at high feed rates and has two effective cutting edges even with small depths of cut.
This new ball-nose endmill performs semi-finishing and finishing applications at high feed rates Its unique design provides two fully effective cutting edges - even with small depths of cut
The new BCRD inserts are designed to withstand the high forces encountered in high metal removal applications.
A protrusion on the base of the insert mounts in a mating slot in the pocket.
A high precision location of the cutting is achieved and the very firm clamping minimises the stresses normally exerted on the clamping screw.
This new insert has a straight edge tangential to the round corner and allows machining of a shoulder with a round corner without mis-match.
• Iscar Tools: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
