ITC Tooling web site, latest news and contact details

Address:
Cyber House 1 Kepler
Lichfiled Road Industrial Estate
Tamworth
B79 7XE
UK
Telephone: (UK) +44 1827 304500

Listing of all 60 news releases from ITC Tooling:

Tooling exhibitor also buys machine at MACH 2008

As well as showing its latest PCD cutting tools at the UK's recent MACH 2008 event, ITC Tooling also placed an order for its second Walter Helicheck machine.

News from ITC Tooling ( 9 May 2008)

Metal cutting tools life, surface finish, are good

User application article In spite the complex machining and demanding materials, a subcontractor said that the tool life offered by its main tooling supplier is good, and that surface finish is impressive.

News from ITC Tooling (20 February 2008)

Slot milling cutter reduces machining time 60%

User application article An 0.6mm slot cutter thas reduced production time in machining 'O'-ring grooves in a titanium component from 4.5h to just over 2h - a saving of over 60%.

News from ITC Tooling ( 8 January 2008)

PCD tipped end mills cut abrasive materials

For machining graphite, metal matrix, composites, Kevlar, carbon fibre and other abrasive materials, a range of end mills have PCD tips to provide longer tool life.

News from ITC Tooling ( 7 December 2007)

Latest tooling fends off moulds competition

User application article Making use of the latest tooling developments - as well as machine tools - have helped a UK mould and die maker to compete with overseas tool makers.

News from ITC Tooling (20 November 2007)

Cutters machine carbon fibre/metal matrix

Among exhibits at the UK's Autosport exhibition in 2008 will be a PCD range of cutters for carbon fibre and metal matrix machining and a series of roughing tools.

News from ITC Tooling (12 November 2007)

Four and six flute rippers raise SS tool life

Try machining stainless steels for the first time and tooling problems arise, but a machine shop found that using four and six flute TiAlN coated rippers increased tool life by at least 50%.

News from ITC Tooling ( 6 August 2007)

Two flute end mills raise machining speeds

User application article The ITC 2031 and 2041 Cyber Series of two flute end mills have improved productivity and increased machining speeds and feeds and improved surface finishes isaid a pattern and tool maker.

News from ITC Tooling (30 July 2007)

Milling cutters quadruple feeds in tough SS

User application article Changing milling cutters enabled a subcontractor to quadruple feed rates in machining flame-cut duplex centrifugal component, which in turn significantly enhanced productivity.

News from ITC Tooling (30 May 2007)

Tooling catalogue includes ball-nose cutters

Included in ITC's latest tooling catalogue are small size ball-nose endmills for rough machining titanium and steel and new cutters with a revolutionary harmonic flute geometry.

News from ITC Tooling (13 April 2007)

Direct drive spindles work up to 90,000 rev/min

Generating considerable interest at the UK's re cent Autosport show was the Air Turbine Tooling with direct drive spindles governed from 25,000 to 90,000 rev/min.

News from ITC Tooling (16 January 2007)

Centre cutting end mill has long tool life

A centre cutting end mill with a reinforced shank and short flute has been developed to deliver exceptional performance under the toughest of machining conditions.

News from ITC Tooling (10 January 2007)

End mills' flute geometry clears swarf

Designed for aerospace alloys machining, an AlTin coated four flute solid carbide end mill with an harmonic flute geometry provides excellent swarf evacuation.

News from ITC Tooling (18 December 2006)

Solid carbide milling cutters reduce power input

User application article Solid carbide cutters to rough machine aluminium have reduced cutting speeds from 4,000 rev/min to near 2,800 rev/min - have improved tooling performance, reduced power input.

News from ITC Tooling (18 December 2006)

High speed attachment ups machining reliability

User application article At 12,000 rev/min, a user's high performance cutting tools continually broke in machining centres and were inconsistent, until a 40,000 rev/min air turbine spindle was attached.

News from ITC Tooling ( 7 November 2006)

End mills machine graphites, matrices and Kevlar

A series of end mills is ideal for machining graphite, metal matrix, composites, Kevlar, carbon fibre and additional abrasive materials commonly used in the Motorsport industry.

News from ITC Tooling ( 6 November 2006)

Diving into Productivity Improvements

User application article ITC introduces tooling to Diving equipment manufacturer

News from ITC Tooling ( 9 October 2006)

Unequal flute spacing boosts end mill performance

A series of AlTin coated, four-flute, solid carbide end mills has been developed for high performance machining of aerospace materials - delivering exceptional stability and metal removal rates.

News from ITC Tooling (18 August 2006)

End mills raise aerospace metal removal rates

End mills that have been specifically developed to deliver high performance machining of aerospace materials provide better swarf evacuation and deliver stability and high metal removal rates.

News from ITC Tooling (14 August 2006)

Air turbine spindles hold 0.0002in TIR

Holding an impressive 0.0002in TIR concentricity, air turbine spindle range is now available machined as one rigid piece of steel with a choice of mounts, HSKA63, CAT40 or BT40.