Product category:
Milling cutters
News Release from: ITC Tooling | Subject: carbide and HSS milling cutters
Edited by the Manufacturingtalk Editorial
Team on 02 December 2005
Solid carbide and HSS tooling to be
shown
An impressive array of tooling at the UK's Southern Manufacturing 2006 exhibition will include a complete range of solid carbide - including two-flute types - and high speed steel tooling
ITC exhibits full range at Southern Manufacturing 2006 Stand M30 Showing an impressive array of tooling solutions at Southern Manufacturing 2006 will be ITC Tooling of Tamworth The company will exhibit a complete range of solid carbide and high speed steel (HSS) tooling and among the new offerings on stand number M30 will be the 2051 reduced shank Cyber series
This article was originally published on Manufacturingtalk on 6 Feb 2004 at 8.00am (UK)
Related stories
Diamond end mills offer longer life in graphite
Diamond coated, high wear resistant micro grain carbide end mills have a 30 degree helix specifically designed for machining graphite with longer tool life than equivalent carbide tools.
Micro-grained ball nose cutter mills hard steels
Manufactured from ultra wear resistant micro grain carbide, a two flute ball nosed, straight shank cutter is designed to machine steels hardened to 65 Rockwell C.
The two flute solid carbide cutter has a 50 degree right hand helix, specifically designed for machining aluminium.
The 2051 series of cutters can machine aluminium, plastics and brass at extremely high speeds and feeds.
To compliment the 2051 series, ITC will also show the new micro grain solid carbide 2082 reduced shank series of two flute ball nose cutters.
Further reading
Carbide cutters machine aluminium at high speeds
Specifically designed for machining aluminium, solid carbide straight shank cutters have the versatility to machine a host of materials ranging from plastic to brass and copper.
Coated carbide roughers last longer on hard steels
Carbide roughing cutters, coated with AlTiN to reduce friction and improve lubrication, provide increased tool life while machining hardened steels at speeds ranging up to 200m/min.
Mill aluminium, brass, at high speeds and feeds
Two flute solid carbide cutter has a 50 degree right hand helix, specifically designed for machining aluminium at extremely high speeds and feeds as well as plastics and brass.
For the machining of graphite, the company will exhibit its 2071, 2072 two flute and 4072 four flute range of diamond coated cutters.
The exceptional wear resistant micro grain carbide end mills have a 30 degree helix to efficiently machine graphite and other abrasive materials.
The 2071 square end and 2072 ball nosed solid carbide cutters are available in sizes from 2 to 12mm in 2mm increments.
Further additions to the renowned Cyber Series to be shown, are the two flute 2032 and 2042 series of ball nosed end mills.
Designed for the high speed machining of hardened steels, the TiALN coated cutters have a short length for maximum rigidity.
The 2032/42 series has a length of cut ranging from 4 to 25mm on an overall shank length of 75 to 150mm and can machine steels hardened to 65 Rockwell C.
ITC will also exhibit the exciting new range of Hanita carbide roughing cutters.
The 4976 series can machine hardened steels at speeds ranging up to 200m/min.
It provides a performance improvement of up to 200% whilst giving a surface finish of 63 micron Ra.
Its AlTiN coating reduces friction and improves lubrication, enabling it to cut under wet and dry conditions on difficult to cut materials.
Other products on show will be the Hanita miniature rib milling cutters.
The square and ball nosed end mills cut graphite and steels hardened to 60 Rockwell C at speeds up to 150m/min.
The four series in the range all come with the option of high quality TiAIN for machining hard materials or a Diamond like Coating (DLC) specifically for machining graphite, aluminium and materials with a high silicone content.
ITC will also exhibit the new range of Hanita 'Vision' end mills.
It has been designed to increase tool life while machining steels hardened up to 67 Rockwell C at speeds ranging up to 200m/min and provides a performance improvement of up to 200%.
ITC is the sole UK agent and stockist of the Hanita range.
To accompany the impressive range of cutting tools, ITC will also exhibit a complete range of 70+ air turbine tools from Air Turbine Technologies (ATT).
The infinitely flexible range of lightweight tools includes products with spindle speeds ranging from 20,000 to 65,000 rev/min.
The tools can be used for grinding, deburring, finishing, mouldmaking, CNC machining, drilling, robotics, etching and a host of other applications on materials ranging from wood, plastics, rubber and stone through to wrought iron, cast materials and exotic alloys.
The turbine tools are all gearless and contain a friction free motor with fewer moving parts to ensure a 30% saving on compressed air consumption and minimal noise levels and vibration during operation.
The air turbine tools are supplied with a 3 or 6mm collet, collet wrenches and air supply fittings.
Vast quantities of all products are held in stock and the exhibition will be the ideal platform for ITC to demonstrate the capabilities of the extensive product range.
Please take the opportunity to visit Stand M30 where a technical member of staff will be more than happy to assist you.
• ITC Tooling: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
