Product category:
Profiling, trimming, routing and drilling
News Release from: Intelicam | Subject: 3- and 4-axis CNC Routers
Edited by the Manufacturingtalk Editorial
Team on 14 February 2008
CNC 3- and 4-axis moulding routers are
affordable
Industrial grade 3- and 4-axis CNC routers are affordable, said the supplier, and ideal for cutting complex curves and machining 3D reliefs for mouldings.
Intelicam manufactures affordable, industrial grade 3- and 4-axis CNC Routers ideal for cutting complex curves and machining 3D reliefs for moulds The company told manufacturingtalk.com that it has just begun construction of a 4-axis high speed foam cutting CNC Router
This article was originally published on Manufacturingtalk on 13 May 2003 at 8.00am (UK)
Related stories
Technique simplifies production leak testing
Leak test technique simplifies and increases production leak test repeatability and selects the ideal fill and stabilization times based on the volume and temperature of the product.
The router has a 5ft x 10ft process area, 4ft of Z-axis motion and an integrated rotational axis that can clamp a foam block 4ft in diameter by almost 7ft long.
The all ball screw and servo drive unit can traverse at 2,000 in/min, and is fitted with, as standard, the following.
* A six-position tool changer.
* Water cooled spindle with inverter.
* Special designed foam cutting router bits up to 12in in length with a 1in diameter shaft.
* Tool height sensor.
* Chip pickup with vacuum.
All moving parts are sealed and protected with baffles from foam particles, which otherwise will harden over time causing maintenance issues.
Intelicam is offering this system for less than US$60,000.
Intelicam is also building a companion high speed foam router that replaces the rotational 4th axis with a vacuum table and 15HP vacuum blower.
• Intelicam: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
