Product category:
Milling cutters
News Release from: Jabro Tools | Subject: JH410 one-flute end mill
Edited by the Manufacturingtalk Editorial
Team on 19 February 2002
One flute end mill inreases metal
removal rates
One flute carbide end mill upgrades performance in milling aircraft components after successful round of preliminary testing by users.
The Aerospace Industry challenge for increasing efficiency, quality and reliabilty, while reducing turn-around-times and total cost of machining operations, requires an innovative solution Jabro Tools has responded to this challenge by introducing the JH410 one-flute end mill, an innovative quality tool for which numbers will say more than a thousand words
This article was originally published on Manufacturingtalk on 10 Jun 2002 at 8.00am (UK)
Related stories
Tools rough hardened steels more readily
One tool covers all - roughing, pre-finishing and finishing - of hardened steels of HRC 60 and above, with increased tool performance.
Cutters machine a tapered full radius in moulds
Here is an answer to the die and mould industry's search for a means to machine a tapered full radius for conical walls and runners: a series of full radius tapered end mills.
Extensive research and development, followed by succesful preliminary testing by leading industrial companies and some of the world's best Machine Tool Builders has resulted in the JH-410 One Flute carbide end mill.
Some Facts and Figures in Aluminium 7075: Q= 6800cm3/min, 162cm3/kW.
Application Example no.
1; Tool JH410 RS diameter 17, Shank Diameter 16.
Milling Operation: Roughing : ap=16mm, ae=17mm, vf=30m/min., Q= 6800cm3/min.
Finishing : ap= 17mm, ae= 0.2mm, vf=2.5m/min., Surface smoothness Ra 0.6microns.
42kW is equal to or less tahn 162cm3/kW.
Drilling Operation: Blind hole 16mm deep, vf= 25m/min., n=25000, in full depth in one step.
Some design details and advantages: * Reduced Shank design enables various projection lengths.
* Suitable for Regrindng.
* Enables Machining Large Volumes.
* Superb finish quality.
* Applicable for drilling (against same feedrate as side milling) and milling operations.* Unsurpassed Volume/KW ratio.
* Reliable and Safe machining operations.
* Less sensitive for vibrations.
* Insignificant adhesion behaviour at relief surface.
* Applicable for High Performance Machining centres with high rpm / Low kW and Low rpm / High kW.
* Also for full radius applications a perfect tool.
* Offered from stock in standard sizes.
* Customized Geometry and Special Specifications upon Customer Requirement and Request Available.
(This was Manufacturingtalk's Top Story on 18 February 2002).
• Jabro Tools: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
