Product category:
Machinery/plant guarding and protection
News Release from: Jokab Safety UK | Subject: Sliding gate safety system
Edited by the Manufacturingtalk Editorial
Team on 25 April 2005
Sliding gate safety system is easy to
install
Compact and easy-to-install safety system is designed for the use with gate-controllers, which give an appropriate test signal before each dangerous movement of a gate.
Jokab Safety can supply a safety package for the automation of sliding gates The compact and easy-to-install safety system is designed for the use with gate-controllers, which give an appropriate test signal before each dangerous movement of the gate
Up to six safety contact edge circuits can be connected to the system in order to offer complete protection during an open or close operation.
The system uses a transmitter to send a signal via a steel core cable which is mounted a long the length of the gate.
Should the contact strips detect an obstruction the transmitter sends a signal through to the controller, which will switch an internal relay to stop the motor.
This benefit of this system is, there is no longer any need for long cable runs and also no physical wear on the cables.
• Jokab Safety UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
