Product category:
Calibration and Laboratory Instruments
News Release from: Julabo Labortechnik | Subject: FL Series
Edited by the Manufacturingtalk Editorial
Team on 17 October 2006
Laboratory chillers have small footprint
Julabo has launched a new range of chillers, called the 'FL Series'.
Julabo has launched a new range of chillers, called the 'FL Series' Aimed at providing an economic, environmentally friendly cooling performance there are 20 different models to choose from; including air or water-cooled units
This article was originally published on Manufacturingtalk on 30 Jul 2002 at 8.00am (UK)
Related stories
Calibrate temperature sensors and thermistors
Julabo temperature baths offer precise temperature stability to +/-0.01degC, covering wide temperature ranges from -95 degC to +300 degC.
Chillers can operate remotely
A range of high quality chillers, which can be located remotely from equipment served, cover wide temperature ranges from -95 degC to +250 degC.
Compact chillers with cooling capacities up to 1.7 kW are ideal for typical lab applications as they can be placed under, or on top of the bench.
More powerful models with up to 11 kW of cooling capacity have been designed with small footprints, thus saving working space.
These chillers are loaded with numerous features.
The working temperature range covers -20C to +40 deg C, utilising a PID controller enabling a temperature stability of +/-0.5 deg C.
Four different pump types with flow rates of up to 80 l/min and 6-bar pressure will meet most requirements.
All units have an LED temperature display integrated into a splash proof keypad, which can be very easily cleaned.
A RS232 interface and an analogue alarm output are located on the front panel, whilst on top of the unit a lift-up cover gives easy access to the filling port.
An additional hinged tray serves as a compartment for the operating manual and other documents.
The removable venting grid allows easy cleaning of the condenser.
All models include an easily visible liquid level indicator.
A pressure gauge is used to display pump pressure on the models that provide a pump pressure of more than 1 bar and these models also feature a pump pressure bypass enabling manual adjustment of the pump capacity.
Venting slots are located only on the front and back of the units, therefore allowing them to be placed directly next to each other.
• Julabo Labortechnik: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
