Product category:
Structural bending machines & steelworkers
News Release from: Kaltenbach | Subject: Punching and shearing systems
Edited by the Manufacturingtalk Editorial
Team on 24 May 2006
Systems punch, shear and drill steel
sections
Punching and shearing systems provide significant production benefits for the special requirements of steel fabrication, flat and angle steel punching, shearing and drilling.
The Kaltenbach KPS range of punching and shearing systems provide significant production benefits for the special requirements of steel fabrication, flat and angle steel punching, shearing and drilling Using state-of-the-art Kaltenbach Multiline 2 software, there are several new additions to the KPS range, providing a choice of highly efficient machines to give a wide mix of punch and shear solutions
This article was originally published on Manufacturingtalk on 29 Apr 2004 at 8.00am (UK)
Related stories
High volume circular saw cuts 70mm bar under 15s
High volume, straight cutting circular sawing system performs rapid, accurate cutting, a full cutting cycle for example, is less than 15 seconds for a 70mm diameter bar.
The new KPS503, three-head vertical punch machine, achieves holes up to 40mm diameter and has a flat shear unit, cutting material up to 25mm thick.
Also angle and 'U' profiles up to UNP320 are readily processed.
Standard supply includes NC control, auto material feed and punch tool changer.
Heavy-duty guide construction enables maximum punch force at all times and hydraulic downward clamping is applied to both in and out-feed sides of the punched material for total stability.
Hydraulic downward clamping is also integrated into the shear units, which also automatically centres over the cut material width to uniformly take up the shear forces.
• Kaltenbach: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
