Product category:
Drilling, boring and reaming
News Release from: Kennametal UK | Subject: Romicron precision-boring tool system
Edited by the Manufacturingtalk Editorial
Team on 12 October 2001
Boring tools produce high quality holes
Precision-boring operations are possible in the 6 to 213mm range, in exceptional cases up to 326mm, in accuracy class IT5. Diameters can be set in under 5 sec on a machining centre.
Precision-boring operations are possible in the 6 to 213mm range, in exceptional cases up to 326mm, in accuracy class IT5 It takes less than five seconds to set the diameter on the machining centre with micrometer-precise accuracy
Romicron, the unique precision-boring tool system from Kennametal Hertel, is an extremely user-friendly finishing tool for internal machining.
The Romicron boring bar head SVUBB1 from Kennametal Hertel adds new dimensions to finish boring.
In the diameter range from 4 to 16.5mm, drill-holes can be precision-finished to extremely tight tolerances at speeds of up to 16,000 rpm.
Romicron is therefore the outstanding solution for cost-efficient and reliable internal precision-boring operations for mass, one-off and small-batch production.
2.
• Kennametal UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
