Product category:
Toolholders
News Release from: Kennametal UK | Subject: Multi-station tooling system
Edited by the Manufacturingtalk Editorial
Team on 10 November 2005
Multi-station tools reduce machining
time
To suit modern multi-purpose turning and milling machines, a novel multi-station tooling system increases the efficiency and flexibility of these machines even further.
To suit the market growth of modern multi-purpose turning and milling machines, Kennametal has developed a unique multi-station tooling system that increases the efficiency and flexibility of these machines even further The compact design and superior rigidity of the new KM25 quick-change system provides a basis for the design of tools with multiple cutting edges that offer very great flexibility of use
This article was originally published on Manufacturingtalk on 25 May 2006 at 8.00am (UK)
Related stories
Multi-station tools suit mill-turn centres
For modern multi-purpose turning and milling machines, a novel multi-station tooling system increases the efficiency and flexibility of these machines by reducing tool changes.
Micro tooling system speeds up auto lathe changes
Quick-change tooling system for automatic lathes, featured in the "Micro Machining Tools" catalogue, has achieved time savings of up to 40% and can be used in turning and boring operations.
Modular drill can be changed in the machine
Modular high-performance drill, that can be changed while in the machine, adds value by reducing machining time and down-time in drilling operations.
Multi-station tools reduce machining time significantly.
One tool change instead of four or even six with conventional turning tools reduces downtime significantly.
Use of the modular KM25 system also generates savings on replacement tools: in many cases only replacement KM25 cutting units will need to be sourced, not of the main body.
And in the event of damage or a tool change, only the KM25 cutting unit needs to be swapped.
As an additional benefit a multi-station tool replaces four or even six traditional turning tools, it only takes up one storage position in the tool magazine, allowing improved utilization of the tool magazine.
This can also reduce the investment costs involved in procuring a new turning/milling center by reducing the size of the tool magazine required.
These new tools also allow for more efficient utilization through unmanned operation.
By equipping the multi-station tool with four identical cutting edges, the productive time of the machine can be significantly increased.
• Kennametal UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
