Product category:
Milling cutters
News Release from: Kennametal UK | Subject: KenTIP modular drilling system
Edited by the Manufacturingtalk Editorial
Team on 14 November 2005
Modular drilling system has long life
A modular drilling system, with disposable cutting tips that can be changed quickly both on and off the machine, has optimised cutting geometry that generates little or no burrs.
Kennametal has further expanded its modular KenTIP program The drilling range now extends from 8mm to 16.99mm in diameter
This article was originally published on Manufacturingtalk on 30 Apr 2004 at 8.00am (UK)
Related stories
Micro tooling system speeds up auto lathe changes
Quick-change tooling system for automatic lathes, featured in the "Micro Machining Tools" catalogue, has achieved time savings of up to 40% and can be used in turning and boring operations.
The KenTIP drilling system stands out for its high level of reliability and ease of use.
The disposable cutting tip can be changed quickly both on and off the machine.
The optimized cutting geometry delivers consistently high tool life and generates little or no burrs.
KenTIP drills machine holes consistent in both size and tolerance which is not always easy to achieve with re-ground solid carbide drills.
The existing program, with holders for 3xD and 5xD has been complemented by the addition of an 8xD version.
All three variants are available either with a flange and parallel clamping flat or with a cylindrical shank.
In addition KenTIP drill bodies for 3xD, 4xD and 5xD drilling depths are now available for the proven Kennametal BF drilling and chamfering system.
This means tools for drilling and chamfering operations can now be rapidly changed without the need for length adjustments for re-ground drills.
• Kennametal UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
