KMT Robotic Solutions
Eaton Place 114 Washway Road
Sale
M33 7RF
United Kingdom
Latest articles from this company
News releases from this company
KMT launches robotic trimming system
KMT Robotic Solutions has launched the Robotrim FT-700, a robotic router trimming system specifically designed to trim acrylic bath tubs.
News from Manufacturingtalk, 13 November 2008
General Electric buys Stationary IV stripper
KMT has delivered a robotic waterjet cleaning system to General Electric's Engine Services facility in Strother, Kansas, for stripping thermal sprayed coatings from jet engine components.
News from Manufacturingtalk, 23 October 2008
KMT Robotic Solutions launches Robotrim FT-502
KMT Robotic Solutions has launched the Robotrim FT-502, a small footprint robotic routing system for the trimming of thermoformed, blow-moulded, rotationally moulded and composite products.
News from Manufacturingtalk, 1 October 2008
KMT adds to robotic waterjet cleaning systems
KMT Robotic Solutions has added a number of new features to the company's robotic three-dimensional waterjet cleaning and surface treatment systems.
News from Manufacturingtalk, 26 September 2008
Robotic routing reduces car kit trim time by 95%
KMT Robotic Solutions said that a robotic routing system has helped a component car kit manufacturer to improve part quality by over 200% and reduce trim time by more than 95%.
News from Manufacturingtalk, 17 April 2008
Software translates CAM tool paths for routing
A CAD/CAM system for use with KMT RoboTrim 6-axis robotic router trimming systems seamlessly integrates into the RoboTrim and JetTool trimming systems.
News from Manufacturingtalk, 31 March 2008
Robotic routing system trims mouldings faster
Robotic routing system, combined with CAD/CAM, is claimed to significantly reduce cycle times for trimming thermoformed, injection moulded and rotationally moulded parts.
News from Manufacturingtalk, 13 February 2008
KMT divests part of KMT Herber's operations
The Swedish KMT machine tool group has made an agreement in principle with three employees at KMT Herber regarding the divestment of part of KMT Herber's operations.
News from Manufacturingtalk, 28 February 2007
Abrasive water jet cutting order awarded to KMT
Under an order from Boeing, KMT Cutting Systems will construct, assemble, deliver and install a complete robotized abrasive waterjet cutting to produce parts for the Boeing 787.
News from Manufacturingtalk, 21 November 2006
Robotised abrasive waterjet cutting system ordered
KMT Cutting Systems AB has won an order for a complete robotised abrasive waterjet cutting system from Boeing, for machining titanium alloys used in the 787 engine nacelles.
News from Manufacturingtalk, 17 November 2006
Cutting systems on show at Euromold
At EuroMold 2006, the themes of the KMT Cutting Systems display at Stand Number H175 in Hall 8.0 are Flexibility and Customer Focus.
News from Manufacturingtalk, 26 October 2006
Open gantry gives routing robots optimum reach
'Open gantry' concept applied to a CNC milling/routing system features inverted robots mounted on a gantry frame to provide optimum reach for trim applications in a variety of materials.
News from Manufacturingtalk, 26 July 2006
High speed routers machine car bodies
Four high cutting speed routing systems are producing interior components for a sports car manufacturer by triming edges and forming holes and slots in a wide range of polymeric materials.
News from Manufacturingtalk, 24 July 2006
Depth tolerance compensation used in routers
A tolerance compensation system, based on using a sensor, is for use with 6-axis robotic routing systems to ensure that depth cuts are carried out to the required tolerances on critical workpieces.
News from Manufacturingtalk, 1 May 2006
500th robotic waterjet cutting system sold to USA
KMT Cutting Systems has announced the sale of the its 500th robotic waterjet cutting system - the machine will be delivered to Avanzar Interiors/Johnson Controls in the USA.
News from Manufacturingtalk, 13 April 2006
Robotic cleaning system order placed
Following extensive trials, the British Nuclear Group has chosen the new robotic cleaning system from KMT Cutting Systems AB, placing an order worth approximately GBP 300,000.
News from Manufacturingtalk, 7 December 2005
Robotic router tools changed when operating
System for robotic routing systems allows tools to be changed while the routing system is in operation and offers an automatic update of tool parameters when a tool is changed.
News from Manufacturingtalk, 30 September 2005
Australian order for water jet cutting placed
KMT Cutting Systems has awon its first order in Australia - the A$650,000 order has been placed by Johnson Controls of Melbourne, a Tier I supplier to General Motors and Ford.
News from Manufacturingtalk, 15 July 2005
Robot removes coatings by water jetting
Robotic system for 3D waterjet cleaning and surface treatment is designed to offer efficient, fast and accurate removal of coatings, grease and other substances from metal surfaces.
News from Manufacturingtalk, 28 April 2005
Routing system uses two robots
Routing systems for finishing polymeric and moulded parts can work on larger workpieces and can increase productivity by using two robots.
News from Manufacturingtalk, 11 February 2005
Not what you're looking for? Search the site.
Featured articles
-
Igus gives away free samples
Igus (UK) is offering free cable carrier and continuous-flex cable samples as part of its Sample Test Drive Programme.
-
EMKA develops compression lock technology
EMKA has developed compression lock technology and is now able to bring its expertise in design/manufacture to the provision of many compression latch variants.
Categories
- Machine Tools: Cutting (4,161)
- Machine Tools: Metalforming, shearing, folding and punching (1,614)
- Machine Tools: moulding (1,162)
- Cutting tools (1,944)
- Welding and Joining (1,577)
- Finishing, preparation, coating and painting (1,123)
- Automation, assembly and computer systems (1,274)
- Manufacturing support (9,056)
- Industry news, commerce, exhibitions, education (8,471)
- Packaging (2,882)
- Specialist Manufacturing Sectors and Metals Producing (1,389)
- Books, CDs and Videos (214)
- IT for manufacturing management and production (3,987)
- IT for engineering, industrial and commercial applications (2,815)
- Used machinery and machine tools (35)
- Materials handling and storage (1,030)
- Wood and non-metallics working (79)
- Metrology instruments and systems (3,868)
- Testing and quality control systems and services (5,221)
- Subcontracting services (1,233)
