Categories
- Machine Tools: Cutting (3,917)
- Machine Tools: Metalforming, shearing, folding and punching (1,481)
- Machine Tools: moulding (1,058)
- Cutting tools (1,766)
- Welding and Joining (1,488)
- Finishing, preparation, coating and painting (1,025)
- Automation and assembly systems (1,044)
- Manufacturing support (8,593)
- Industry news, commerce, exhibitions, education (8,185)
- Packaging (2,865)
- Specialist Manufacturing Sectors and Metals Producing (1,318)
- Books, CDs and Videos (189)
- IT for manufacturing management and production (3,425)
- IT for engineering, industrial and commercial applications (4,837)
- Manufacturing IT hardware and communications (1,569)
- Used machinery and machine tools (29)
- Materials handling and storage (912)
- Wood and non-metallics working (73)
- Metrology instruments and systems (3,798)
- Testing and quality control systems and services (4,939)
- Subcontracting services (1,142)
Clamp-together duct for mists, fumes, trim scrap
A
Kirk and Blum Duct product story
Edited by the Manufacturingtalk editorial team
Feb 13, 2007
Quick installation and easy system modification are features of the clamp-together duct from Kirk and Blum which is supported with free 3-D design software.
Kirk and Blum's clamp-together duct is designed for quick installation and easy system modification, and now supported with free 3-D design software to ensure system performance and easy installation.
Assembled with the lifetime-guaranteed Forever Clamp, the duct is available in galvanized or stainless steel in one-inch diameter increments from 3" to 24" with accessories such as in-line mist accumulators, industrial-grade blast gates, swiveling ball joints, sweeps, hoods and all other components required for total system.
Clamp-together duct is ideal for virtually any negative-pressure ventilation system up to 40" water gauge with entrained dust, sand, fumes, mist, smoke, chips, trim scrap, etc.
Higher pressures can be accommodated on request.
Clamp-Together duct ranges from 24 gauge to optional 10 gauge thickness in galvanized and stainless steel with numerous options, including FDA-approved gaskets and seam seals for food applications or ground-and-buffed interior welds and seams for stranded or stringy materials.
The rolled lip on the duct and fittings acts as a stiffening ring to enable Clamp-Together duct to withstand much higher pressures than spiral or standard rolled duct.
The lifetime-guaranteed Forever Clamp is made of stainless steel and fitted with a winged O-ring gasket made of N-butyl rubber that resists most chemicals and oils and is suitable for temperatures to 250degF.
Other gasket materials include red silicon, Viton, and Gore-Tex.
Adjustable sleeves and components make field fitting to any length possible.
Nominal 5' lengths of duct have a rolled lip on each end, which can be cut down and slid into the sleeve or fitting and secured with an O-ring and Forever-Clamp.
Various hanging systems are available, including KandB's K-wick cable system, which is 70% faster than using threaded rod, conduit or saddles.
KandB Duct can provide free 3-D design, working from simple hand sketches.
A project inventory of all standard and special parts is then developed.
At the customer's request and for no additional cost, components are boxed and marked with sections/segments packed together for efficient staging at the job site.
Not what you're looking for? Search the site.
Contact Kirk and Blum Duct
Related Stories
