Product category:
Metalforming lubricants
News Release from: Kluber Lubrication GB | Subject: Paraliq 68 deep-drawing oil - aluminium
Edited by the Manufacturingtalk Editorial
Team on 24 August 2006
Oil keeps foil off rollers and raises
production
Following a request to supply a foil drawing lubricant, a supplier chose one that has resolved foil separation and drawing issues for trouble-free production for over 12 months.
Following a request to supply a foil drawing lubricant which would meet the customers' specific requirements Kluber Lubrication were put to task to establish which lube out of over 3500 products would best meet the criteria set out After using Paraliq 68 for over 12 months the customer has resolved foil separation and drawing issues for trouble-free production
This article was originally published on Manufacturingtalk on 28 Apr 2004 at 8.00am (UK)
Related stories
Hydraulic oils formulated for food manufacturing
NSF H1 certified HLP hydraulic oils exhibit excellent low friction characteristics, low temperature fluidity and water separating behaviour as well as far lower top up needs.
Lubrication switch saves bearing breakdowns
A major user of polythene extruders had a major problem of repetitive large taper bearing lubrication break-down, which was solved by switching to a grease lubricant.
The customer required a food grade product which would have good adhesion to the foil for drawing but without inter-layer sticking.
In addition the lubricant must be easily applied without over lubrication whilst enduring the deep drawing process, hence high pressure resistance and excellent corrosion protection were of prime importance, but without leaving unwanted residue on the finished drawn foil product.
Kluber technical department developed a Paraliq P 68 oil dispersion solution for performance and ease of application.
This product can be applied in a number of ways including spraying, dripping and a felt-roller lubricating system.
Incorporating high-purity synthetic oil, Paraliq P 68 is colourless, NSF H1 registered and available in different container options.
With a threefold function, it has to protect the film/foil from corrosion, assist the separation of the foil during uncoiling and work as a stable deep-drawing oil, the Kluber Paraliq P68 is a true winner in the eyes of the aluminium foil/foil container manufacturers. Request a free brochure from Kluber Lubrication GB ...
• Kluber Lubrication GB: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
