Product category:
Vertical machining centres (VMC)
News Release from: Geo Kingsbury Machine Tools | Subject: Hermle C 30 U and C 40 U gantry-type VMCs
Edited by the Manufacturingtalk Editorial
Team on 13 January 2004
Modular 5-axis gantry VMCs can configure
into cell
Modular, gantry-type VMCs equipped with a rotary/swivelling trunnion table for 5-axis machining can be linked by a pallet changer and transport system to form a complete cell.
Vertical machining centres equipped with a rotary table mounted on a swivelling trunnion to provide fourth and fifth CNC axes are available from a number of suppliers, but the new Hermle C 30 U and C 40 U gantry-type models from Geo Kingsbury take the technology a step further Hermle has introduced multiple options for automation based on a pallet changer that either serves one machine, or can be extended with pallet transport and storage to configure a complete manufacturing cell
This article was originally published on Manufacturingtalk on 26 Aug 2003 at 8.00am (UK)
Related stories
Foundry's mill-turning investment ups exports
Coventry-based foundry has upheld and expanded exports by adding on high-tech mill-turning centre facilities to machine turbocharger impellers supplied to Italian and US customers.
Pick-up spindle lathe has hexapod features
A new, hanging-spindle, vertical turning lathe (VTL) has been introduced by Index on which the spindle head is able to move freely in three dimensional space.
Likewise there are many options for loading, handling and unloading the components themselves.
The smaller machine has a 650 x 600 x 500mm working envelope while that of the larger model is 850 x 700 x 500mm.
Each is available in two variants, one with linear acceleration of 6m/s2 to 45m/min axis traverse and a chip-to-chip time of around 5.5 seconds, and a 'dynamic' version with uprated specifications of 10m/s2, 60m/min and 4.5 seconds respectively.
Further reading
Vertical turning lathe takes on complex production
New from Index is the option to fit a four-axis CNC tool turret in addition to a standard two-axis turret on the German manufacturer's V300 vertical turning lathe (VTL), allowing the production of mor
Brass turning on CNC lathes
Leipold (UK) uses eight Index 6-axis CNC lathes supplied by Geo Kingsbury, the latest two installed during May and June 2000
Bigger envelope vertical-spindle machining centre
The new, Spanish-built Kondia ZM-99 vertical-spindle machining centre from Geo Kingsbury MHP has a working envelope more than 50 per cent larger than the CM60-MA model which it replaces.
Noteworthy on all models are the use of a linear motor for table rotation, and a mineral casting bed for stable, vibration-free machining.
The bed has a novel arrangement of three staggered linear guideways, one being central to, and set back from, the outer two.
This effectively halves the span and gives stable Y-axis traverse owing to three-point support combined with a single drive unit in line with the central carriage on the gantry.
On installations with a pallet changer, pallet size is 320, 400, 500 or 630 mm square, the latter being an option on the C 40 U only.
Hydraulic counterbalance in the vertical axis, pneumatic pallet clamping at the set-up station, and removal of contamination from reference surfaces are integral functions, and there is a media distributor for pneumatic or hydraulic workpiece clamping in fully automatic mode.
A storage and high speed handling system is available for workpieces up to 250mm cubed and 40kg in weight.
Alternatively, a shuttle system can be positioned to the left of the machine; or a fully conveyorised, turnkey package may be specified.
Production capability is enhanced by 65 rpm rotational speed of the 360-degree rotary table (B-axis) and up to 25 rpm rotation of the trunnion (A-axis).
Maximum table load is 1400kg for the larger machine and 800kg for the smaller.
The user is able to choose twin rotary tables on the trunnion, a 1070 x 700mm fixed table capable of supporting two tonnes, and an NC rotary indexing head built into one side of the bed.
The latter two options may be specified singly or together in place of the trunnion, which can also be replaced by a 360 degree indexer driven from both ends and with 20 clamping positions on four sides.
This is especially useful when machining relatively small, near-net-shape castings or forgings requiring minimal metal removal and hence very short cycle time per component.
Modular features of both machines include tool magazine extensions to 197 positions, graphite machining packages, and four spindle options from 10,000 rpm / 32kW/200Nm to 40,000 rpm/26kW/17Nm to suit diverse applications from contouring moulds from tool steel to high speed machining of light alloys for the aerospace industry.
Control options are Heidenhain iTNC 530 or Siemens Sinumeric 840 D, both of which are Ethernet enabled for networking.
• Geo Kingsbury Machine Tools: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
