Product category:
CNC automatic lathes
News Release from: Geo Kingsbury Machine Tools | Subject: Index SpeedLine C42 and C65 bar automatics
Edited by the Manufacturingtalk Editorial
Team on 25 February 2004
Bar automatic deploys three tools
simultaneously
Twin-opposed-spindle bar automatic has a novel turret guideway system that is stiffer and gives additional space in the working area allowing three tools to cut simultaneously.
A new design of twin-opposed-spindle bar automatic has been introduced by the German manufacturer, Index, that distinguishes itself by a novel turret guideway system having a cast iron plate sliding over ceramic-coated steel strips It is several times stiffer than traditional slideways, has better damping characteristics and is also more compact, giving additional space in the working area
This article was originally published on Manufacturingtalk on 26 Aug 2003 at 8.00am (UK)
Related stories
Foundry's mill-turning investment ups exports
Coventry-based foundry has upheld and expanded exports by adding on high-tech mill-turning centre facilities to machine turbocharger impellers supplied to Italian and US customers.
Pick-up spindle lathe has hexapod features
A new, hanging-spindle, vertical turning lathe (VTL) has been introduced by Index on which the spindle head is able to move freely in three dimensional space.
X- and Z-axis drives to the upper and lower turrets are via kinematic rods behind the bed.
Both turrets also have a conventionally driven Y-axis stroke of 70mm.
The machine is available from sole UK agent, Geo Kingsbury, in two sizes designated SpeedLine C42 and C65, the numbers representing the maximum bar capacity in millimetres.
Further reading
Vertical turning lathe takes on complex production
New from Index is the option to fit a four-axis CNC tool turret in addition to a standard two-axis turret on the German manufacturer's V300 vertical turning lathe (VTL), allowing the production of mor
Brass turning on CNC lathes
Leipold (UK) uses eight Index 6-axis CNC lathes supplied by Geo Kingsbury, the latest two installed during May and June 2000
A full C-axis and 20kW/105Nm of spindle power are provided at both ends, delivering top speeds of 6,300 rpm and 5,000 rpm for the respective models.
Clearance between the 140/160mm diameter chucks for between-centres work is 615mm.
The opposed spindle is not only powerful but also has the unusual option of 150mm of X-axis movement in addition to 600mm of longitudinal travel.
By adding the extra degree of freedom in X as well as having the usual Z-axis motion, and electronically coupling them with the X/Z movements of a lower, double-sided, 24-tool turret (optionally available in place of the single-sided version), Index provides the ability to have three tools in cut simultaneously.
This is achieved by having the upper 12-station turret and the left face of the lower turret machining a component in the left hand spindle while the 'slave' right hand spindle follows the latter turret around, enabling a parted-off component to be machined using the right face of the lower turret.
In other words, the X- and Z-axis movements of the lower turret resulting from the cutting cycle in the left hand spindle are continually allowed for in the programmed movements for back-working.
The only limitation when cutting with three tools is that the Y-axis movement of the lower turret cannot be used for front-end machining, as the opposed spindle would be unable to follow.
Idle times are minimised by fast rapid traverse rates in X, Y and Z of 25, 50 and 12m/min respectively.
A steeply angled bed assists swarf removal from the working area of these 6.5 tonne mill-turning centres, whose 5kW/16Nm / 6,000 rpm driven tool capacity is available at all 12 stations of each turret.
Noteworthy too is polygon generation using a head mounted directly on the counter spindle rather than on a turret, ensuring vibration free machining and hence greater accuracy and longer tool life, especially on alloy steels.
• Geo Kingsbury Machine Tools: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
