Product category:
CNC turning centres, mill/turning, multi-tasking centres, horizontal and VTLs.
News Release from: Geo Kingsbury Machine Tools | Subject: Traub TNX65/42 mill-turning centre
Edited by the Manufacturingtalk Editorial
Team on 21 December 2006
Turning centre deploys 80 tools without
a magazine
A 15-axis mill-turn centre of twin-opposed-spindle configuration and may be equipped with two, three or four disc turrets - deploying up to 80 tools without a tool magazine.
The new, German-built Traub TNX65/42 mill-turning centres from UK agent, Geo Kingsbury Machine Tools, are of twin-opposed-spindle configuration and may be equipped with two, three or four disc turrets, each capable of holding 10 driven or static tools on both faces using double toolholders So up to 80 tools can be accommodated in this conventional design of lathe
This article was originally published on Manufacturingtalk on 26 Aug 2003 at 8.00am (UK)
Related stories
Foundry's mill-turning investment ups exports
Coventry-based foundry has upheld and expanded exports by adding on high-tech mill-turning centre facilities to machine turbocharger impellers supplied to Italian and US customers.
Pick-up spindle lathe has hexapod features
A new, hanging-spindle, vertical turning lathe (VTL) has been introduced by Index on which the spindle head is able to move freely in three dimensional space.
Normally for a CNC lathe to deploy such a large number of tools, its design is based on a single-station turret head with automatic tool change (ATC) from a magazine outside the working area.
As a conventional turret tends to be more robust than its ATC counterpart, higher accuracy machining may be achieved, added to which the 10-tonne TNX65/42 is constructed on a heavily ribbed, cast iron slant bed that dampens vibrations and promotes close tolerance machining.
Tool change is faster with a disc turret than when cutters are exchanged from a magazine, leading to higher productivity as well.
Further reading
Vertical turning lathe takes on complex production
New from Index is the option to fit a four-axis CNC tool turret in addition to a standard two-axis turret on the German manufacturer's V300 vertical turning lathe (VTL), allowing the production of mor
Brass turning on CNC lathes
Leipold (UK) uses eight Index 6-axis CNC lathes supplied by Geo Kingsbury, the latest two installed during May and June 2000
Balanced turning of slender workpieces or two dis-similar machining operations performed at the same time are established advantages of twin-turret turning, which is achievable at both spindles simultaneously.
The TNX65/42 takes the technology a stage further, however, with the possibility of tools in three turrets cutting simultaneously at either spindle.
In addition to travels in X and Z of 650mm and 175mm respectively, there is +/-40mm of Y-axis movement on each turret, enabling keyway milling, off-centre drilling, side face milling and similar operations to be carried out.
Even more complex components may therefore be completed in one hit, with all attendant benefits including less work-in-progress, shorter lead times, zero fixture costs and reduced manning overheads.
The result can be cycle times so quick that they would normally be associated with a multi-spindle auto.
Of symmetrical design, the machine has its turrets arranged on independent slides above and below the spindle centreline, giving maximum versatility for optimising cycle times.
Furthermore, the headstock is thermo-symmetrical and the synchronous, C-axis motor-spindles are of identical rating at 24kW / 5,000 rev/min for the 65mm bar capacity machine and 28kW / 7,000 rev/min for the 42mm bar model.
Hybrid bearings are fitted as standard for increased service life.
Control is provided by the TX8i-s running, as usual, Traub's in-house developed software.
It is optimised to the manufacturer's lathes and is backwardly compatible, allowing programs to be run that were created on earlier controls.
Realistic 3D simulation shortens set-up time and avoids collisions when producing first-off components.
On-line and off-line programming with powerful synchronisation and optimisation of up to four machining sequences can be provided by Traub's optional WIN FLEX IPS graphical object-orientated software.
• Geo Kingsbury Machine Tools: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
