Product category:
Food and drink manufacturing: processing equipment
News Release from: Krohne | Subject: Optimass Coriolis mass flowmeter
Edited by the Manufacturingtalk Editorial
Team on 04 January 2006
Mass flowmeter cuts fruit upgrade costs
The exceptional measurement range and low pressure differential of a Coriolis mass flowmeter has enabled a fruit processor to almost halve the number of flowmeters for an upgrade of its plant.
The exceptional measurement range and low pressure differential of Krohne's Optimass Coriolis mass flowmeter has enabled a leading American fruit processor to almost halve the number of flowmeters it expected to install as part of an upgrade of its plant in California While planning the upgrade the fruit processor investigated the options available for accurately measuring the flow of bulk concentrates used in the manufacture of its products
This article was originally published on Manufacturingtalk on 5 Aug 2003 at 8.00am (UK)
Related stories
Calibration rigs investment boosts flowmeters
Seven state-of-the-art calibration rigs costing more than GBP 500,000 have been installed at a mass flowmeter manufacturer's facility in Wellingborough to meet customer product demand.
Flowmeters ensure biscuits' ingredients mix
Biscuit manufacturer has installed two Coriolis mass flowmeters to overcome the problem of ensuring exact amounts of ingredients are added during manufacture.
Because the flow rate of the concentrate can vary substantially during production, the best solution presented from the company's previous supplier was to install two flowmeters for each production process; one to measure low and the other high flow rates.
As well as almost doubling the number of instruments needed - when compared to the original mechanical meters used - it was found that this solution also introduced production problems.
Each instrument contained two 1/4in tubes which introduced a significant pressure drop and restricted the flow of the concentrate.
Further reading
Mass flowmeters control manufacturing costs
Four Coriolis mass flowmeters have been installed at a UK dairy products manufacturer - replacing manual measurement to enable the company to control manufacturing costs more accurately.
Mass flowmeters help reduce product wastage
Krohne's Optimass Coriolis mass flowmeters are used by BASF to help reduce product wastage and potential downtime during the manufacture of industrial paints and varnishes.
Krohne, which manufactures the Optimass at its factory in Wellingborough, Northamptonshire, then became involved and proposed using its Optimass 7000 flowmeter.
The instrument is of single, straight-tube design which does not impede the flow of substances passing through it.
The instrument also has a broad measurement spectrum, which ranges from 0.3 to 560,000kg/h (0.66 to 20,500 Ib/min).
This meant that only one flowmeter was needed for each production process.
The fruit processor has already purchased 19 Optimass flowmeters and will be standardising on them throughout its plant.
They are used to accurately measure the flow of bulk concentrates, including corn syrups, high fructose and sucrose into mixing vessels.
A signal output from the Optimass is fed to a PLC which controls the flow of concentrate into the mixing process.
This enables the fruit producer to manufacture bulk product to precisely the desired Brix.
During a second phase the blended concentrate is diluted with water and placed into a container with fruit.
During initial trials of the Optimass, engineers working for the fruit processor found that because the pressure differential was much less than the units that had previously been installed, they could use a smaller instrument than they had envisaged.
This also enabled the company to further reduce costs.
Krohne's Optimass Coriolis flowmeter was the first of its kind to incorporate a single straight tube design.
It is manufactured from materials that conform to Food and Drug Administration (FDA) guidelines and complies with EHEDG (European Hygienic Engineering and Design Group) and 3A standards.
The meter is available with a wide range of industry standard hygienic process connectors which makes it ideally suited for use in food applications.
• Krohne: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
