Product category:
Manufacturing communication infrastructure
News Release from: Korenix Technology | Subject: JetCon
Edited by the Manufacturingtalk Editorial
Team on 17 March 2005
Industrial Media Converter Launched
Korenix Technology has announced the launch of the JetCon Series Industrial Media Converter this spring.
Korenix Technology, the professional manufacturer of top-notch products for industrial automation, has announced the launch of the JetCon Series Industrial Media Converter this spring The Korenix JetCon Series Industrial Serial/Ethernet/Fiber Media Converter automatically converts serial/Ethernet/fibre signals without any modification to the connected PC's hardware or software
This article was originally published on Manufacturingtalk on 28 Nov 2006 at 8.00am (UK)
Related stories
Industrial Ethernet control over fibre
Korenix has announced the JetCon 1301, an Industrial 10/100Base-TX to 100Base-FX Multi-Mode /Single-Mode fibre convertor
RS232/RS422/485 to fibre convertors
Korenix Technology introduces the high performance JetCon 2401 RS232/RS422/485 to fibre convertor series.
The JetCon Series consists of 4 models:.
* JetCon 2301: Ethernet-to-Fibre Converter.
* JetCon 2101: RS-232 to RS-422/485 Converter.
* JetCon 2101i: RS-232 to RS-422/485 Isolated Converter.
* JetCon 2101ir: RS-422/485 Isolated Repeater.
JetCon 2301 is an Ethernet-to-Fibre Converter with one SC type connector.
When connected to fibre, the JetCon 2301 can transmit up to 30 km with single mode, and 2 km with multi mode, offering highly reliable data transmission from Ethernet devices.
The built-in Link Lose Forwarding technology and fault relay output promptly alarms users if a port breaks or power fails.
The robust aluminum case offers IP30 standard protection plus dual redundant power inputs with reverse polarity protection.
The JetCon 2101/2101i/2101ir allows you to overcome the limitations of the RS-232 protocol, including speed, range, and networking capabilities, by utilising different voltage lines for data and control signals.
The JetCon 2100 Series has the built-in "AutoPro" function, which can adjust the JetCon's baud rate and data format for different devices in an RS-485 network.
Most RS-232 to RS-485 converters in the market use DIP switch to select baud rate and data format, but "AutoPro" allows JetCon to be auto-configured to the same baud rate and data format in the entire RS-485 network.
• Korenix Technology: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
