High voltage 2kV optical isolation protection

Korenix releases a high performance 4-port RS232/422/485 redundant serial device server with digital I/O controls

Korenix releases a high performance 4-port RS232/422/485 redundant serial device server.

JetPort 5604 series is a 4-port serial to redundant ethernet device server, each serial port supporting 3-in-1 RS232/422/485 serial interfaces.

JetPort 5604i provides 4 RS422/485 serial interfaces with 2KV optical isolation protection.

You can use one IP address, dual redundant paths to control maximum 4 serial devices over the Ethernet.

The data throughtput can be also reached to high performance 460.8 Kbps for each serial port.

You can configure the devices as Virtual COM, TCP Server, TCP Client, or UDP modes.

The JetPort 5604 series also equipped with 2 types of redundant power inputs, 4 Digital Inputs and 2 Digital Outputs.

The JetPort 5604 series can be configured by JetPort Commander, the easy-to-use Windows utility which supports device discovery, device configuration, multiple device setup wizard and monitoring, and the HTTPS and SSH for high secured management.

The Notification includes the Email alert, System log, SNMP traps and Digital Output for pre-defined events.

The applications can be most suitable for remote gas pump controls in gas station, control and monitor field sensors network in industrial automation, automatic warehouse control systems, remote and distributed serial device control systems.

The JetPort 5604 has 4 ports 3-in-1 RS232/422/485 serial ports.

JetPort 5604i provides 4 RS422/485 serial interfaces with 2KV isolation protection.

All of the ports can be configured with different serial interface types, like RS232, RS422, 2-wire RS485 or 4-wire RS485.

Each of the port also can be configured with different service modes.

You can configure serial port-#1 to Virtual COM mode, serial port-#2 to TCP server, serial port-#3 to TCP client and serial port-#4 to UDP mode.

All of the serial ports have their own settings and can work well at the same time.

The JetPort 5604 system can use the 4 digital inputs, 2 digital outputs to determine the state of limit or safety switches or to receive remote digital signals from connected device in the industrial fields.

It allows users to connect the termination units' 5V TTL digital input/output.

JetPort also provides one data port for user to program DI/O via get and set commands.

JetPort 5604i equipped with 2KV optical isolation protection and 15KV ESD surge protection of serial interfaces.

Optical isolation solves the problem of ground looping which can severely garble communications, by effectively lifting the connection between the serial data line and "ground" at either end of the serial networking line.

Back to top