Product category:
Electrical and Electronic Testing
News Release from: Kistler Instruments | Subject: G-Force
Edited by the Manufacturingtalk Editorial
Team on 29 September 2004
In Search Of The Elusive Perfect Golf
Swing
A new device to help golfers find and keep the perfect swing required precise location and acceleration measurement and electronics algorithms that were produced by Project Electronics.
Even the top, professional golfers find it virtually impossible to find and keep the perfect swing, so what chance the beginner and club player? Both could soon benefit from a device currently being developed by Project Electronics for one of its clients Called G-Force, the new device will clip onto the golf club near the head and an LCD readout will indicate to how close the swing was to perfection
This article was originally published on Manufacturingtalk on 27 May 2004 at 8.00am (UK)
Related stories
Clamping force tester checks spot welds in-process
A clamping force tester can be integrated with electrode cap machining and weld current checking to monitor spot welding equipment performance and maintenance.
Compact torque sensors suit many applications
Piezoelectric reaction torque sensors, having high sensitivity, extremely rigid construction and compactness, can be adapted very easily and flexibly to suit a wide variety of installations.
Sounds simple but developing the algorithm to convert a golf swing into a single number has proved to be far from easy.
Project Electronics needed to measure the acceleration throughout the stroke and use this to locate the centre of rotation of the golfer's body.
This involved fixing accelerometers near the head of the club and on the golfer's wrist to produce an acceleration curve that would indicate the "quality" of the swing.
Further reading
Miniature accelerometer resists harsh conditions
Miniature triaxial accelerometer has been designed for use in aggressive environments such as automotive engine bay, aerospace subsystem vibration testing and industrial quality control.
Software reduces injection moulding rejects
Running on a laptop, the combination of signal conditioner and data management software provides real time graphic display, analysis, monitoring and documentation of injection moulding.
As even novice golfers are sensitive to the weight and balance of the club, it was essential that the accelerometers were not so large and heavy as to influence the swing of the club.
At only 5.74 mm in diameter, 4.3 mm long and weighing 0.4 grams, the Kistler 8778A500, one of the smallest and lightest accelerometers commercially available, was ideal for the job.
Housed in a small plastic holder, the accelerometer could be quickly attached to the club without tools and, more importantly, without damaging the shaft.
To gather the required data, golfers at a local driving range were asked to cooperate.
A representative sample of novice and expert, male and female golfers of different sizes were asked to complete a brief questionnaire before being fitted with the two accelerometers.
The cable from the accelerometer on the club was taped to the shaft and run up the arm of the subject along with the cable from the wrist accelerometer, over the shoulder and to a data logger.
The subject was then asked to drive several times using their normal swing, the whole process taking only 20 minutes.
>From the mass of data collected over a whole day, Project Electronics is developing the algorithm to convert the acceleration experienced by the club head into a number indicating the quality of the swing.
When the design is finalised, the G-Force device will be totally self-contained with an accelerometer chip, processing circuits and readout mounted on a small printed circuit board in a plastic moulding that clips onto the club shaft.
Immediately after each stroke, on the course or the driving range, the golfer will be able to see just how good his or her swing really was.
Project Electronics' Technical Director, Meryck Willeard, says, "What initially seemed to be a relatively straightforward consultancy project soon developed onto a complex investigation.
It took the combined resources of both Kistler Instruments and Project Electronics to solve the problem of measuring acceleration at club head and golfer's wrist without the measuring instruments introducing errors.".
• Kistler Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
