Thermal imager is multi tasking

The TP8 thermal imager from Land Instruments International is used to inspect plant, buildings, structures and other targets.

With Bluetooth voice recording technology and a detector resolution 45% higher than the standard 320 x 240 pixels, the TP8 thermal imager from Land Instruments International sets new standards wherever thermography is used to inspect plant, buildings, structures and other targets.

Within the measurement range -20 to 800 degC / -4 to 1470 degF, users can capture thermal and visual images simultaneously, record dynamic radiometric sequences of moving targets in real-time, and store up to 1,000 images on the generous 2Gb storage card - all part of the standard package.

Automatic capabilities include hot spot and image centre detection, and preferred operational settings can be saved and recalled instantly.

Inspection reports can be created in minutes with a simple Microsoft Word interface using a pre-defined template or manually by the user, and can include the thermal and visual images, measurement details, annotated text and any other essential information.

The TP8 uses a 384 x 288 IR camera and a colour 1280 x 1024 visual camera.

Operators simply locate the scene to be inspected, press the shutter and then have both high-resolution thermal and visual images taken and saved together in a single file with text annotation and a voice recording of up to 30 seconds.

The integrated laser locator helps to associate a hot spot shown in a thermal image with the real physical target.

Up to eight areas can be analysed simultaneously in live, zoomed, frozen or saved format with respective maximum, minimum or average temperatures indicated within each.

Display options include line, histogram and isotherm.

The TP8 flash internal memory can store up to 450 images, with a further 1000 on the SD card.

Back to top