Product category:
5-axis (3+2 axes and continuous path) machining centres
News Release from: Leader CNC | Subject: 5-axis machining centre turns and grinds
Edited by the Manufacturingtalk Editorial
Team on 28 September 2006
5-axis machining centre turns and grinds
too
Multi-function machining centre can machine, turn and grind complex components and has an extremely fast tool-to-tool time of 1.1s that works with a 60 position tool changing system.
Represented in the UK and Ireland by Leader CNC Technologies, Kitamura Machinery has just launched the revolutionary 5-axis Mytrunnion 1 machining centre at the recent IMTS exhibition in Chicago, USA Capable of machining, turning and grinding complex components the Mytrunnion 1 is destined to be a success in the UK
This article was originally published on Manufacturingtalk on 18 Jul 2005 at 8.00am (UK)
Related stories
Two advanced machining centres to go on show
Kitamura will show a VMC with a 30,000 rev/min spindle and Fanuc 16iMB CNC control with 500 block look ahead and a high accuracyt production HMC at EMO 2005.
Servo barfeed has under 3 min set-up time
Barfeed uses a fully electric servo driven magazine to provide fast and easy handling, which is demonstrated with its remarkable set-up times of less than three minutes.
Equipped with an upgraded Fanuc 300iS control, the Mytrunnion 1 has been designed not only for high speed 5-axis machining; it can also turn components at 1,000 rev/min.
The machine also combines an optional 30,000 rev/min spindle speed with the rotary table for grinding operations.
With processing times of increasing importance, the Mytrunnion 1 has an extremely fast tool-to-tool time of 1.1s that works with a 60-position automatic tool change system that is fitted as standard.
Further reading
Machining centre investment beats competition
To remain competitive a UK engineering company employs high technology machine tools and its most recently acquired machining centre has realised a productivity gain of almost 25%.
Horizontal and vertical machining centres launched
A 5 axis horizontal machining centre, with a newly designed pallet exchange system and trunnion arrangement has linear/rotary scales that guarantee high accuracy and high metal removal.
The Mytrunnion 1 is ideal for medical parts, aerospace components, and similar complex parts up to 350mm in diameter and 215mm high.
Cooled ballscrews and scales are fitted as standard to achieve and maintain the extremely high accuracy.
Not only do these attributes make the machine ideal for tight tolerance components, it also guarantees exceptional repeatability.
To demonstrate this, the machine at IMTS was fitted with a 20 pallet system to exhibit the Mytrunnion's capability to comfortably fit into a volume production or unmanned running environment.
For 5-axis machining, the Mytrunnion 1 uses an A-axis tilting trunnion fitted with an integral full rotary C-axis having a rotational speed of 1,000 rev/min.
The Mytrunnion 1 is also capable of heavy duty cutting.
This is provided by its hardened and ground box ways that have a dampening effect seven times greater than linear guide ways.
When combined with the high spindle torque, the Mytrunnion has a removal rate of 240cm3/min in S50C steel - exceptional for a machine of that size.
At under 7m2, the Mytrunnion 1 has been designed to take up less floor space, now at a premium in most companies.
This footprint is increasingly impressive when the overall capability of this machine allows it to finish components in a single set-up, usually in an area requiring a number of machines.
The Mytrunnion 1 is now in production and will be available from Leader CNC Technologies following the JIMTOF exhibition, in Japan, in November.
It will be exhibited in the UK for the first time at the Meditech Exhibition at the Birmingham NEC in February 2007.
Since the launch of the larger 630mm pallet Kitamura Mytrunnion vertical 5-axis machining centre in 2002, worldwide installations now number over 100 units.
Additionally, over 800 5-axis Supercell horizontal machines have been installed since 1981, confirming the capability of Kitamura to manufacture multi-axis machines. Request a free brochure from Leader CNC ...
• Leader CNC: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
