Motors have integrated servo drives

With the drive integrated into the back of a range of servo motors, which can deliver rated torques down to zero speed, machine builders benefit with reduced panel and installation costs.

The Lenze fluxxtorque range of servo motors with integrated servo drives are available in three sizes for powers up to 500W.

With the drive integrated into the back of the motor, machine builders benefit with reduced panel and installation costs.

Nominal output torques range from 0.45 to 1.6Nm with highly dynamic peak torques up to 14Nm.

Motors are rated at 3000 rev/min and can deliver rated torques down to zero speed.

Taking the drive out of the panel and integrating it with the motor allows the panel to be smaller.

Only one component needs to be installed saving time.

Further savings can be found by creating loop or spur connections from motor to motor, so reducing cable length, and there is no need for the cable to be shielded for EMC.

This new product line has been developed for applications in packaging, wood processing, warehousing and medical technology.

So for example, limit stops can be reset quickly and precisely in the event of product changes, or food dosed precisely to the gram.

Further advantages come from the compact and smooth bodied design with IP54 enclosure.

Control communications can be by PROFBUS or CAN.

A comprehensive range of in-line and right angle gearboxes is available for speed reduction.

Back to top