Lenze extends 9400 servo range functionality

Lenze has extended the functionality of its 9400 servo range with uprated power capacity and curve generation software.

For applications with power requirements above 75kW that require a low overload capacity, the continuous power ratings of the 9400 drives have been increased by up to 40 per cent.

For powers above 75kW and up to a maximum of 420kW, the 9400 servo drives have uprated continuous capacity with reduced peak torques.

Servo drives in machinery such as packaging or pick and place can replace mechanical cams.

The same curved motion paths can be achieved without wear and at high speeds.

The Lenze 9400 servo drives across the range starting at 0.37kW have cam software that permits a number of different profiles to be stored for different machine settings.

Up to 256 cam profiles can be stored with up to 50 interpolation positions per cam.

Alternatively fewer profiles are possible with interpolation up to 16,384 points for complex and highly accurate paths.

Lenze L-force Engineer software simplifies data import and automatic path generation.

The 9400 servo range is part of the Lenze L-force product portfolio.

Drives are available for single or multi-axis configuration with two positions for optional plug-in communications that can include real-time fieldbuses such as Profinet and Powerlink.

A further plug-in position allows drive safety functionality such as Safe Torque Off and Safe Stop.

Back to top