Product category:
Metals processing plant and equipment
News Release from: Linde Gas | Subject: Gas burners
Edited by the Manufacturingtalk Editorial
Team on 13 June 2007
Gas burners for the metals industry
demonstrated
Gas burners for the iron, steel and metals industries offer improved yield and quality, enhanced throughput and reduced costs, as well as limited environmental impact.
Increased product value, improved yield and quality, enhanced throughput and reduced costs, as well as limited environmental impact, are all business benefits obtained from Linde's gas burner products Linde Gas will be demonstrating its range of solutions for the iron, steel and metals industries at the parallel GIFA, METEC and THERMPROCESS fairs in Dusseldorf, Germany
This article was originally published on Manufacturingtalk on 16 Feb 2007 at 8.00am (UK)
Related stories
Oxyfuel increases galvanising capacity by 30%
An oxyfuel that heats by direct flame and cleans, has boosted galvanizing capacity by 30% and resulted in removal of the 25m strip pre-cleaning section at a German steel plant.
Pit furnace fuelling to raise mill capacity
Four pit furnaces at a French steel rolling mill will in a performance guarantee contract, during 2007-2008 be converted into full oxyfuel operation to boost the rolling mill capacity.
Results from customer installations will be displayed in three separate stands, and presented at simultaneous conference sessions: European Metallurgical Conference (EMC 2007), InSteelCon and the THERMPROCESS Symposium.
At GIFA, Linde will demonstrate HIGHJET TDI oxygen technologies for cupola foundries, which can increase the melt rate by 30%.
Also being demonstrated are how low-temperature oxyfuel burners further boost the capacity in aluminium melting furnaces while avoiding oxidation of aluminium and reducing emissions of NOx.
The results of REBOX oxyfuel solutions at ThyssenKrupp Steel and Ascometal, together with 100 other steel reheating and annealing furnace installations, are in focus at METEC.
Results include up to 50 percent increased furnace throughput, 50% fuel cost reductions and improved heating process with lower emissions of CO2 and NOX.
Better product quality and yield, higher production rates and a minimum of maintenance are some results of CARBOJET high-speed gas injection solutions in heat treatment, fully demonstrated at THERMPROCESS.
Linde Gas increased its industrial know-how and solutions portfolio following the Linde and BOC merger in September 2006.
GIFA, Hall 3, B 22.
METEC, Hall 6, G71.
THERMPROCESS, Hall 5, B19.
• Linde Gas: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
