Product category:
CMMs (co-ordinate measuring machines) and software
News Release from: LK | Subject: LK G80 CMM
Edited by the Manufacturingtalk Editorial
Team on 08 November 2004
Subcontract inspection attracts more
machining
One of the largest CMMs installed in Northern England - the basis for subcontract inspection work - is attracting more contracts for machining jobs as a company has discovered.
One of the largest co-ordinate measuring machines (CMM) in the north of England, certainly in respect of its vertical measuring capability, is the LK G80 at the Stockport facility of contract machinist, CTL Engineering Ever since the machine was installed for inspecting mining equipment components for British Coal in 1988, the company has not only used it for internal quality control, but has also offered its 3m x 1.5m x 1.5m high measuring volume for subcontract inspection work
This article was originally published on Manufacturingtalk on 14 Jul 2000 at 8.00am (UK)
Related stories
Measuring software cuts Jaguar's time to market
The ability to program inspection machines well in advance of the prototype stage is helping Jaguar to shorten the lead time between drawing board and forecourt.
Mitutoyo CMM programming time halved by software
At Luton-based Huntleigh Healthcare, the time taken to program a seven year old Mitutoyo co-ordinate measuring machine (CMM) has been halved using CAMIO software
On the back of this, many new contracts for machining have been won over the years.
Traditionally an oil industry subcontractor, CTL has over the last few years halved this sectors contribution to turnover to around 35 per cent, moving strongly into aerospace which now accounts for 25 per cent of business.
Typical jobs going through the shop in September 2004, for example, were Airbus landing gear components for Messier-Dowty, training bombs for Harrier jump jets, escalator winding mechanisms for London Underground and an aluminium-bronze submarine propeller requiring 5-axis machining that the company cleverly completed by repeated repositioning on a 4-axis machining centre.
Further reading
CMM software applicable to LK and other makes
LK, has introduced a new, advanced suite of programming software for use with its own and other manufacturers' co-ordinate measuring machines.
Complex aerospace CMM programming uses CAD data
Subcontractor Castillion says it would not really be able to handle some of the work it does now without LK CAMIO, a CAD-to-CMM interface which allows solid models to be imported and used
CMM upgrade allows import of solid models
Derbyshire-based co-ordinate measuring machine (CMM) manufacturer, LK, has upgraded the Zeiss CMM at the Heraeus QuartzTech factory, which produces silica quartz ovenware for semiconductor makers.
In 2002, CTL won yet another aerospace contract to inspect Eurofighter parts for BAE Samlesbury, which involved measuring the aircrafts fuselage frame.
The latter is 1.8 metres high, however, so the subcontractor asked LK to extend the G80s Z-axis by 300 mm to accommodate the component.
To ensure that the machine was accurate over this extended volume, LKs customer support department carried out full error mapping and correction.
At the same time, as BAE supplied to CTL inspection programs written in Valisys DMIS (Dimensional Measuring Interface Standard), whereas the G80s control used the older CMES protocol which was retrofitted on a PC platform 10 years ago by LK to replace the orginal DEC VAX computer, together with new scales and drives.
So this time LK was also asked to upgrade the machine with a modern PC running DMIS.
Despite the machines age and it having been operated virtually round the clock since it was installed, it still measures very accurately, testament to the original build quality and the six-monthly calibration carried out by LK to ISO 10360-2.
The latest calibration certificate shows that the machines original accuracy specification of MPEE (maximum permissible error when measuring length) of 14 + L/125 microns is still achieved.
In April 2001, CTL was one of the first subcontractors in the UK to obtain ISO 9001:2000 and earlier this year it received the SAE AS 9100 Revision B, which is the latest approval required by the international aerospace industry.
Both the G80 and the smaller G-90C CMM from LK installed in 2002 underpin these approvals.
The latest measuring machine was bought in response to a significant increase in business at CTL around that time.
According to Simon Walker, Quality Assurance Manager, the new work came from all industry sectors and also from neighbouring sister company, TDA Solutions, which assembles clean rooms for mass spectrometry and manufactures sterilising equipment for hospitals and food factories.
Inspecting bought-in parts for the latter operation now accounts for eight hours CMM time per week.
Commented Walker, "Aerospace customers have always demanded comprehensive CMM inspection of their components backed by full reports.
However, over the past few years, companies operating in other sectors have increasingly been demanding a similar service, including the oil industry where component failure can be catastrophic.
"It has lead to a big increase in quality control workload and, together with the general upturn in business, meant that we needed a second CMM." The G-90C is a quick machine, capable of inspecting any given part around three times faster than the G80, not surprisingly as the latters bridge alone weighs seven tonnes.
The measuring envelope of the new CMM is nominally 2000 x 1200 x 1000mm and, owing to the complexity of many of the parts being inspected, has been fitted with a 6-position stylus changer to avoid manual change and resets.
Walker estimates that automated stylus exchange saves eight hours of CMM time per week.
He continued, "When it came to invest in a second machine, we reviewed what was available on the market and decided that, in terms of speed and build quality, there was not much to choose between the different CMMs; they would all have been able to inspect our parts.
Where the LK machine scored was its ease of operation and programming.
The latter is particularly important here as eight-off is a big batch for us and we often inspect one-offs.
We were also happy with the support we have received from the supplier over the years." A general observation he makes on the use of CMMs is that they make sure the machine tools are performing correctly, which he describes as a "huge advantage" as it is possible to see if a series of components is drifting out of tolerance.
It allows timely investigation as to the cause and in addition helps in choosing the best machine to deploy on any particular job.
In 2005, CTL intends to upgrade both its CMMs by having LK fit its latest AIM controller and installing the manufacturers proprietary CAMIO Studio software.
This will allow measuring programs to be prepared directly from a CAD model of the component, instead of having to program the CMM by the teach-in method.
More complex jobs such as a rotor blade currently take a day to program this way, whereas demonstrations given by LK engineers show that the same program can be produced in a couple of hours using CAMIO Studio.
• LK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
