Product category:
Calibration and Laboratory Instruments
News Release from: Labtex | Subject: Huber Flow- through Chillers
Edited by the Manufacturingtalk Editorial
Team on 05 June 2006
Flow through chillers for low demand
Huber 'Flow- through Chillers' are designed for simple low demand cooling applications.
Huber 'Flow- through Chillers' are designed for simple low demand cooling applications They are commonly used with simple heating circulators to remove heat and accelerate cooling around room temperature
This article was originally published on Manufacturingtalk on 12 Aug 2005 at 8.00am (UK)
Related stories
Laboratory equipment from premium manufacturers
Premium international laboratory equipment brands have selected specialist new supplier Labtex to supply their products in the UK.
Flow through coolers can also widen the temperature range of any thermostat with the ability to control to -30oC.
The DC range are compact stand alone refrigeration units with a control range of -30oC to +50oC.
Flow through coolers have no pump and therefore must be used in conjunction with an existing circulator.
'Dip or 'Immersion Coolers' are ideal for simple cooling applications when low temperatures are required in vapour traps and dewar vessels etc They can also be used to remove heat from other thermostatic circulators.
Three models are available to -45oC, -50oC and -100oC.
Two versions are available with and without control.
The digital version will control at a set temperature to within +/- 0.5K and the standard version can be used in conjunction with an immersion heater to achieve set temperatures between ambient and the lowest achievable temperature of each particular model.
Immersion probes are available in rigid or flexible designs. Request a free brochure from Labtex ...
• Labtex: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
