Product category:
Monitoring and sensor equipment and systems
News Release from: Magna Projects and Instruments | Subject: Mantracourt digital signal conditioning equipment
Edited by the Manufacturingtalk Editorial
Team on 10 December 2001
Digital signal conditioning equipment is
efficient
Magna Projects and Instruments has been appointed as Distributor for Mantracourt's range of cost-efficient, user-friendly, digital signal conditioning equipment.
Magna Projects and Instruments has been appointed as Distributor for Mantracourt's range of cost-efficient, user-friendly, digital signal conditioning equipment The range includes the DSC Digital Strain Card, which allows direct connection of transducers such as strain gauges to a computer system via RS232C, RS485, MODBus, CANBus and Mantrabus options
This article was originally published on Manufacturingtalk on 17 Dec 2001 at 8.00am (UK)
Related stories
Connect up any strain gauge device to an input
Magna Projects and Instruments is able to supply evaluation kits for Mantracourt's DSC Digital Strain Card and D-Cell Digital Strain puck for only GBP 125 + carriage and VAT.
Melt pressure transducers avoid contamination
The Series 2000 range of Melt Pressure Transducers' patented design allows accurate pressure readings to be made without the traditional transmission-liquid filling.
Resolution is up to 19 bits (1 part in 524,288, or 0.0002%), with 0.001% noise immunity.
The D-Cell has a a similar specification to the DSC, but is in a compact cylindrical geometry to allow, for example, integration directly into load cells.
The cards have on-board set-up and calibration routines, and can supply process data directly in scaled engineering units.
These units are ideal for Production Monitoring, OEMs and R and D Applications.
Other items in the Mantracourt range include the versatile ADP 15 DIN-rail or panel-mounted process monitoring and control instruments.
Available to take inputs from LVDTs, strain gauges and load cells, AC and DC voltages and currents, temperature sensors, potentiometers, shaft encoders, pulses (to display both frequency and total).
Outputs available are DC current and voltage, alarm and control signals, and computer communications.
Also in the range are the SGA analogue Strain Gauge Amplifier, the SMP Surface Mount Intelligent Process Amplifer, the LCA15 and LCB In-Line Intelligent Strain Gauge Amplifiers, and the VisualLink SCADA software package.
• Magna Projects and Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
