Product category:
Drives, motors and power transmission, couplings, clutches
News Release from: Mega_F Motion Systems | Subject: Motion Control Module DSP-M3
Edited by the Manufacturingtalk Editorial
Team on 22 August 2002
Complex control alogrithms realised by
module
Motion Control(Core) Module DSP-M3 is a tiny board (half credit card dimensions), designed to serve as a S/W and H/W base block in high demand motion and I/O control applications.
Motion Control(Core) Module DSP-M3 is a tiny board (half credit card dimensions), designed to serve as a S/W and H/W base block in high demand motion and I/O control applications The control power of this module is defined by the computing power of the Floating Points SHARC DSP processor and the logic power of the Altera ACEX 30K device
This article was originally published on Manufacturingtalk on 28 May 2007 at 8.00am (UK)
Related stories
3D models of off-the-shelf telescopic slides
Telescopic ball bearing slide designer and manufacturer, Accuride International, has produced optimised 3D models of its 'off-the-shelf' products which can be downloaded via its website.
Full digital set-up on tension control system
A new digital tension controller is claimed to be one of the most comprehensive tension control systems currently available
Both control algorithms and control hardware are programmable.
The number of encoder counters, PWM devices, their resolution and much more can be programmed to meet the applications requirements.
The Motion Core Module implements the most complex and sophisticated part in motion control design, it provides all the necessary means for the realization of complex control algorithms, control S/W and H/W necessary to optimize the customer applications.
The Motion Core Control S/W implements Mega_F innovative algorithm, high resolution motion profiles and their "on the fly" computing methods, accurate start up and commutation algorithms for any type of DC Brushless motors, deep nested algorithm structures with "back antiwindup circuits" backlash compensation algorithms, advances 1/T algorithms and advanced micro stepping methods including high quality close loop algorithms for step motors.
The Motion Core S/W also implements the Mega_F Process Description Multi-Tasking Language - an extremely powerful and friendly tool to program and run the applications by non-skilled customer.
Any type of motors, various I/O functions, centralized or distributed control - these are the features of the Motion Core Module.
DSP-M3 is the latest version of the Mega_F Motion Core Modules and based on the 3.3V, BGA technology chipset.
• Mega_F Motion Systems: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
