Product category:
Cutting lubricants, coolants, systems and treatment
News Release from: Master Chemical Europe | Subject: Trim E705 universal soluble cutting oil
Edited by the Manufacturingtalk Editorial
Team on 17 February 2003
Soluable cutting oil needs minimum
maintenance
High quality universal soluble oil for a broad range of machining and grinding applications requires minimal maintenance in even the most demanding fluid management systems.
Trim E705 is a new, high quality universal soluble oil from Master Chemical Europe that requires minimal maintenance in even the most demanding fluid management systems It is suitable for a broad range of machining and grinding applications and for a wide variety of materials - from aluminium and steel alloys to cast iron and yellow metals
This article was originally published on Manufacturingtalk on 22 May 2001 at 8.00am (UK)
Related stories
Surface and edge grinding machines cleaned up
Cleaner machine tools, prolonged coolant life and lower operating costs are the three main benefits of switching to TRIM C270 synthetic coolant.
Coolant cleans up surface and edge grinding
Cleaner machine tools, prolonged coolant life and lower operating costs are three main benefits experienced by Stanley Tools since making the switch to TRIM C270 synthetic grinding coolant.
This is a stable emulsion whose chemical and mechanical lubricity makes it the ideal choice for high quality, consistent parts manufacturing.
Features of this new product include higher alkalinity in dilution and an improved biocidal package to ensure even better sump life, particularly in hard water environments; it has been formulated to run in up to 900 ppm.
And naturally this improved performance has been achieved without compromising its 'green' credentials.
Trim E705 contains no nitrites, secondary amines, phenols, sulphur or chlorine as extreme pressure additives.
The product requires no CHIP 3 hazard labelling and in common with all Master Chemical fluids is capable of being recycled.
In high-speed turning and milling, Trim E705 has the correct balance of cooling and lubrication to provide good tool life and surface finish.
It does not foam and will run effectively for long periods without the need for costly additives.
Its fine particle size reduces carry-off and ensures the point of cut receives consistent coolant supply.
Trim E705 leaves an oily residue to protect the machine and fixtures that can easily be removed with water, working solution or aqueous cleaners.
Field trials of the product have proved highly successful.
Its superior sump life and performance in a hard water area were confirmed by a motorsport component manufacturer.
The emulsion was used in both a lathe and a milling machine for the production of aluminium and steel parts.
The customer also reported improved machine cleanliness and low odour.
Having reported its existing coolant was degrading in 4 - 6 weeks, a company in the aerospace sector was also selected to put Trim E705 to the test.
As well as aluminium and steel, the company machine Modulan - a lightweight, hard material used for scale model testing.
It confirmed no degradation or discolouration of the Master Chemical fluid during the test period and complete satisfaction in the fluid's subsequent performance.
• Master Chemical Europe: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
